Spherotech magnetic separators and accessories

SKU: QMSS-1100   |   Availability ⓘ

Spherotech magnetic separators and accessories

SKU: QMSS-1100   |   Availability ⓘ
Type
Pack Size
AU $311.00 Regular price

Taxes and shipping applied at checkout.

/

Spherotech has several different designs of magnetic separators. These are used for separating both Paramagnetic and Ferromagnetic particles from a suspension. These designs accommodate different size tubes and other receptacles specific to various applications.


(A) The SPHERO FlexiMag Separator (QFMS-1000) accommodates tubes ranging from 1.5ml microfuge tube to 200ml tissue culture bottle. It uses interchangeable tube holders to secure different size tubes and bottles. The separator comes with a set of three tube holders, Small, Medium and Large. Additional holders can be purchased separately, if needed.

  • The Small holder holds up to four 1.5ml microfuge or four 10 or 12 x 75mm test tubes (8 total)
  • The Medium holder can hold 2 x 15ml centrifuge or two 16 x 100mm tubes (4 total)
  • The Large holder can hold two 50ml centrifuge tubes (4 total)
  • Two 200 mL tissue culture bottles directly without any tube holders

(B) The SPHERO FlexiMag Separator Jr. (QFMJ-1000) holds up to eight 1.5ml microfuge tubes, 5ml cryovials, 10 x 75mm or 12 x 75mm tubes.

(C) The SPHERO MicroMag Separator (QMMS-2100 and MMS-2000) are designed to fit any 96-well plate with round bottom, flat bottom or V bottom.

(D) The SPHERO HandiMag Separator (QHMS-1000) is a 25.4 x 50.8 x 9.5mm Neodymium-Iron-Boron high strength magnet with nickel coating . The HandiMag can be used to separate the magnetic particles in various containers such as microfuge tubes, test tubes or centrifuge tubes by holding the magnet against the wall of containers by hand or with a rubber band.

(E) The SPHERO MiniTube Mag Separator (QMTMS-16) holds up to 16 x 1.5ml tubes.

(F) The SPHERO UltraMag Separator (QUMS-3000) and SPHERO UltraMag DW Separator (QUMDS-1000) are designed to facilitate the washing of magnetic particles in the Magnetic Particles Enzyme Immunoassay (MPEIA) using 96-well plates. The magnetic pegs of UltraMag Separator fit between the wells underneath the 96-well plate.

The microplate is read in an appropriate microtiter plate reader by loading the microplate with the attached UltraMag Separator into the reader. The magnets ensure that the magnetic particles stay out of light beam passing through the bottom of the well and corresponding holes in the UltraMag Separator.
A combination of magnetic particles as solid phase and conventional enzyme immuno assay (EIA) microplate technology offers significant advantages over the conventional EIA. Some of the advantages are listed below:

  • Magnetic particles offer larger surface area and significantly faster reaction kinetics; thus, reducing the total time to complete an assay.
  • Microparticles are washed more efficiently leaving less residual reactants, thus, lowering background signal and potentially improving sensitivity.
  • Coating of magnetic particle is easier, gives a more uniform solid phase and helps to minimise lot-to-lot variation.

See the MAGNETIC SEPARATOR section of the TECHNICAL INFORMATION Page of the Spherotech website to see photos of several magnetic separators.

Updated: 08-05-2024
Code Type Pack Size Availability* Price (ex GST)
QFMJ-1000 FlexiMag Jr. Each 4 weeks AU $631.00
QFMS-1000 FlexiMag Separator Each 4 weeks AU $841.00
QHMS-1000 HandiMag Separator Each 4 weeks AU $332.00
QMMS-2100 MicroMag Separator Each 4 weeks AU $771.00
QMSS-1100 FlexiMag Separator tube holders Set 4 weeks AU $311.00
QMTMS-16 MiniTube Mag Separator Each 4 weeks AU $1,381.00
QUMDS-1000 UltraMag DW separator Each 4 weeks AU $1,053.00
QUMS-3000 UltraMag Separator Each 4 weeks AU $1,035.00

* Availability Explanation

X weeks – the estimated lead time, based on the average time taken previously to fill orders from this particular supplier. Lead times are from when we receive your order until when we fill your order. For delivery times, please see shipping information below.

In Stock – Plenty of stock on the shelf, ready to ship.

No ETA – our supplier has advised they cannot provide an accurate ETA. Generally there is some issue with supply, and it may be more than 6 months.

REFUNDS AND RETURNS

Please ask prior to returning any goods.

Defective products should be returned to us for replacement or credit. It is best to contact support with as much detail as possible, including pictures, so we can quickly resolve the issue. ProSciTech Pty Ltd complies with the ACCC guidelines, available here: https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund 

If you decide the item purchased does not suit your requirements, you may contact us to see if a return is possible. Some items may not be refunded, so please ask before purchase if you think a return may be necessary. The greater of $15 or 15% re-stocking charge  will be levied on materials returned due to an error on the part of the customer. We try to keep this charge minimal, however returns do have a cost to us.

SHIPPING INFORMATION

Shipping and Handling charges are $20 for Australian orders; free for orders over $200. 

In-stock items are generally sent same day. Orders are shipped shipped from Townsville, Queensland. Our couriers pick up from 2:30pm, so please place your order in plenty of time for processing and packing if you would like it sent same day. When items are not in stock, your order may be part-shipped. Items on back-order will be sent as soon as they become available.

ProSciTech will choose the courier for your order with consideration for the destination, value of parcel, weight and perishability of contents. It is our concern that our shipments reach you, our customer, rapidly and in good condition. Please contact us if you have any issues with a shipment and we will do our best to resolve it. Please keep in mind however, that our legal responsibility ends when goods are passed to the carrier.

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $20
Express shipping $30

Delivery times:

Check your email for tracking details provided at time of shipping for updates of your parcel. We cannot guarantee delivery times, as this is outside of our control. The following are the delivery estimates as given by our couriers. 

Regular shipping
Queensland   1-3 business days 
Sydney   2-5 business days 

Melbourne, Adelaide, Hobart or Canberra 

 3-10 business days 

WA, NT and non-metro areas

 4-10 business days 
Express shipping
Australia wide   1-2 business days

Urgent Orders:

Please request "Express" if you would like us to upgrade your shipment to express delivery. Providing your order fits in a satchel and/or is under 1kg in weight, we will ship your order either DHL, TNT or Express Post. Larger or heavy orders need a quotation for additional freight costs.

Dangerous goods:

See the table on the page for DG shipment costs by road. Please specify when ordering if you require air service (this can be prohibitively expensive). Please request a quotation. We will charge at cost.
 

Shipping to New Zealand Destinations

Orders are now shipped 'receipted delivery'.

Charges:

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $26 Minimum Charge

Heavy items (e.g. benchroll or large quantities of microscope slides) may require an additional freight charge - please ask for a quote.

DANGEROUS GOODS shipped to New Zealand: Dangerous goods will be air-freighted and the freight charge billed at cost. Typically, this will be about AUD $600AUD to New Zealand (Up to 2kg).

Delivery times: by air with signature on delivery, depending on courier, delivery can take 3-14 working days. Customs delays are unpredictable and can extend the delivery. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

Shipping to Rest of World Destinations

Contact us for a quote for shipping. 

Delivery times: by air with signature on delivery, depending on courier, delivery can be 7-21 working days. Customs delays are unpredictable and can extend the delivery time. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

DANGEROUS GOODS shipped outside Australia: Not available

GUARANTEE

All products are guaranteed as advertised. Defective products should be returned to us for replacement or credit. Please contact us prior to returning goods. 

We endeavour to provide accurate descriptions, illustrations, prices and stock availability, but errors and omissions are possible. All quotations are E&OE (Errors and Omissions Excepted) 

LIABILITY

All products are intended for laboratory applications only and the user assumes all responsibility involved in use and handling. We accept no liability for loss or damage resulting from the use or abuse of our products. 

At ProSciTech, we make it easy for you to get an accurate quote for the products you're interested in. Our automatic quote generates a formal quote, including shipping, and sends it to your inbox.

If you can see the price and you are within Australia, you can generate a quote at any time.


Creating a quote:

1. Click "Log In" to sign in or create an account

This is just an online profile. It will store your address(s) and online order history. It does not store credit card details. WE DO NOT SPAM.

Click "Log In" to sign in or create an account

2. If you do not have an account, click "create account"

Accounts are just a profile, and are identified by email address, not by name or institution. 

If you do not have an account, click "create account"

3. Fill in your name, email address, choose a password, and click "Create"

Fill in your name, email address, choose a password, and click "create"

4. Go to your account

When you a logged in, your email address will show as your profile

Click on to your account to enter shipping address

5. Enter your shipping details and click "Add address"

You can store more than one shipping address.  

Enter your shipping details and click "Add address"

6. Go to the product page of the item(s) you would like quoted.

Go to the product page of the item(s) you would like quoted.

7. Click on "Add to formal quote"

Click on Add to formal quote

Repeat for any additional products


8. Go to your cart

Go to the cart

9. Check the product details and the address are correct

Check the product details and the address are correct

10. Click on your preferred shipping method

You can collect, choose regular shipping, or ship express for light orders.

Click on which method of shipping you prefer

11. Click on "Generate formal quote"

Click on Generate formal quote

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

Trouble Shooting

  1. You do not receive the quote
    Solution: If you received a message to say a quote has been sent, check your spam folder. If you have a very strict firewall, please email to ask the quote is sent direct.
  2. No discount applied
    Solution: Check the discount, as most discounts apply to online orders only.
  3. Incorrect freight charge (eg there is freight charged on an order over $200)
    Solution: check you are logged in and you have entered your shipping address.

For Manual Quotes:

In some cases, a manual quote may be necessary. This could be if the product doesn't have a price listed online, if you're located outside of Australia, or if your total order will exceed $1000.

To request a manual quote, simply click the "Request Quote" button and submit a support ticket with your shipping address and phone number. Alternatively, you can email us directly at support@proscitech.com. Our team will review your request and send you a quote as soon as possible, generally 1-2 days.