WIRES FOR EVAPORATION, 99.99%
High purity wires are available as follows. On request, we will include free of charge a 500mm length, 1mm diam. high purity Al wire with your next order. Al is best for making solid or two-way, optical quality mirrors.

Cat. No.	Material	Diameter	Length
V031	60:40 Gold/ palladium	0.2mm Ø	3m
V035	Platinum	0.1mm Ø	1 or 10m
V0352	Platinum	0.2mm Ø	0.6m
V036	Palladium	0.2mm Ø	0.6m
V037	80:20 Platinum/ palladium	0.2mm Ø	3m
V039	Gold	0.2mm Ø	1 or 5m
V0395	Gold	0.5mm Ø	100mm
V042	Silver	0.2mm Ø	3.05m
V0425	Silver	0.2mm Ø	15.2m

V036 Palladium wire, 0.2mm diam AUD69.00 /600mm Available
V031 Gold/Palladium wire, 0.2mm diam AUD496.00 /3m Available
V035 Platinum wire, 0.1mm diam AUD63.00 /1m 10% discount for 10 Available
V0352 Platinum wire, 0.2mm diam AUD172.00 /600mm Available
V037 Platinum/palladium wire, 0.2mm AUD436.00 /3m Availability
V039 Gold wire, 0.2mm diam AUD184.00 /1m 10% discount for 5 Available
V0395 Gold wire, 0.5mm diam AUD78.00 /100mm Available
V042 Silver wire, 0.2mm diam AUD87.00 /3.05m Availability
V0425 Silver wire, 0.2mm diam AUD395.00 /15.2m Available

TUNGSTEN WIRE
Pre-cleaned, equivalent to 218 grade of GE, ready for use. All 99.95% pure.

We can supply wholesale quantities of tungsten wires and baskets. Inquire

V009 Tungsten wire, 0.13mm diam AUD10.00 /6.1m Available
V010 Tungsten wire, 0.2mm diam AUD13.00 /2m Available
V011 Tungsten wire, 0.5mm diam AUD34.00 /5m 10% discount for 10 Available
V012 Tungsten wire, 0.89mm diam AUD43.00 /6.1m Available
V013 Tungsten wire, 1.0mm diam, 99.95% purity AUD33.00 /2m 10% discount for 10 Available

INDIUM WIRE for v.h. vacuum seals, low temperature soldering and evaporated coatings
Malleable indium is recommended for static seals in very high vacuum systems. Indium also produces excellent evaporated coatings. These are used in the physical sciences, including for the production of efficient, tarnish resistant mirrors and as a low melting point solder, using pure indium or alloyed.
These wires are produced to 99.999% purity and guaranteed to be no less than 99.99% pure indium.

Indium: At. wt. 114.82; at. no. 49; m.p. 156.6 degrees C; b.p. 2080 degrees C; sp. gr. 7.31; valence 1,2 or 3.
For practical considerations indium is non-toxic.

Sealing with indium
Indium is used as a sealant to bond non-wetting surfaces. Using a compression seal made from indium, one can join glass, ceramics and metals. Compression breaks the oxide layer and creates a bond between indium and substrate.
Indium seals are especially useful where low temperatures and physical vibrations are concerns. Cryogenic and high vacuum environments are areas where indium seals have become an essential component of the manufacturing process.
Indium is favoured in high vacuum electron microscope vacuum seals since the material perfectly moulds into existing surfaces and forms a tight, but easily broken and renewed bond in static positions. The seal remains perfect up to the melting point of indium - which is greater than the vacuum-bake temperature in these systems. Outgassing is very low and of a nature that does not impair instrument performance.
For larger quantities ask for a quotation. Indium requirements for EM are small, but we can supply large commercial quantities at BEST prices.

The PD suffixed 1.5mm indium wire is identical to the VIn15, except it was badly wound and therefore is marginal for vacuum sealing applications. Perfect though for evaporation and low temperature soldering.

We supply indium products at wholesale prices, inquire
Prices are for indium wire now in stock. New stock would need to be priced on current cost.
User notes | MSDS

Orders for greater length will be supplied in one, at most 2 pieces.
VIN05 Indium wire 0.5mm diam. 4N AUD29.00 /m 10% discount for 10 Available
VIN07 Indium wire 0.7mm diam. 4N, AUD32.00 /m 10% discount for 10 Available
VIN10 Indium wire 1.0mm diam. 4N, AUD36.00 /m 10% discount for 10 Available
VIN15 Indium wire 1.5mm diam. 4N AUD43.00 /500mm 10% discount for 10 Available
VIN15PD Indium wire 1.5mm diam. 4N, with physical damage AUD57.00 /500mm 10% discount for 10 Available

NICHROME WIRE
Nichrome wire for inoculating and other loops for laboratory use. 30 gauge/ 0.25mm and 0.6mm diameter. The wire is nominally 80 Ni and 20 Cr with very minor impurities except for 0.5% Mn. Resistance over 300mm is 6.2 Ohm for the 0.25mm wire and 1.2 Ohm for the 0.6mm wire.

VNICR-025 Nichrome 80/20 wire, 0.25mm diam (0.0098) AUD18.00 /15m Available

CARBON STRING AND CORD
For carbon coating, these do not evaporate from a point and hence give more uniform coatings. Thickness may be changed by using one or several strings/yarns. Cord gives thicker coatings and is more suitable for dispersive analyses and self-supporting carbon films.

Note on Carbon Fibre:
These do not require as many strands as the previously supplied string, so it is more cost effective. It also gives a better coating and improved electrical conductivity.
As a guide, one length of carbon fibre will give approximately 10nm, and two lengths 20nm.
To use, twist the carbon fibre lightly together and place between the sprung electrodes, trimming any surplus.
High purity carbon cord may be used to coat samples for microanalysis.

Approximate measurements:
V004 - width 2mm, thickness 0.1mm
V005 - width 2mm, thickness 1.0mm

V004 Carbon fibre AUD10.00 /1m 10% discount for 10 Available
V005 Carbon cord AUD43.00 /1m 10% discount for 10 Available
V006 Carbon cord, high purity AUD90.00 /1m 10% discount for 5 Available

GRAPHITE RODS
Spectrographically pure graphite rods 305mm long. Both carbon and graphite rods contain amorphous and graphite carbon. Analytically these rods are identical - spectrographically pure carbon. The graphite content of carbon rods is increased by high temperature baking. Dull, dark-grey rods are high in carbon and shiny, silver-grey rods are high in graphite. Graphite rods have less electrical resistance; they are better electrical conductors, so under vacuum they need greater electric currents to sublime. The possible and actual evaporator settings determine which rods work better. For carbon coatings and films in electron microscopy most operators prefer graphite rods. Spectrographically pure carbon rods are now difficult to obtain and we can no longer supply these.

Carbon's melting and sublimation points: ~3550°C; boiling point is 4200°C; evaporation temp (at which a substance has a vapour pressure of 1.33 x 10-2 mbar): 2400°C.

These are Grade 1 rods; impurities are under 2ppm.

V001G Graphite rods, Ø 3.2 x L305mm AUD83.00 /pk/12 Available
V002G Graphite rods, Ø 6.4 x L305mm AUD98.00 /pk/12 Available
V003G Graphite rods, Ø 4.8 x L305mm AUD86.00 /pk/12 Available

MANUAL CARBON ROD SHAPING TOOL
This is a simple hand tool for shaping carbon rods into cylindrical tips about two millimeter in diameter. About 4mm of such a cylinder are great for the production of carbon films in an evaporator. The rod is inserted into the tool and rotated by hand against an adjustable tungsten carbide cutter until a cylinder of the desired length is formed.

Prior to cutting the rod with a small cylinder tip, the rods must be sharpened using an office pencil sharpener. The sharpener should be used for that purpose only. The cutting blade cuts into the side of the rotated rod and cannot cut into the end of a flat rod.

User Notes - V57 & V572

V57 Carbon/ graphite rod shaping tool for 3mm rods AUD102.00 Available
V572 Carbon/ graphite rod shaping tool for 6.2mm rods AUD71.00 Availability

CARBON/GRAPHITE ROD SHAPING TOOL
The easiShaper™ is an electric motor driven carbon rod sharpener which offers easy, quick and clean carbon rod shaping for carbon evaporators which are using either 6mm (1/4"), 3mm (1/8") or 4.75mm (3/16") stepped carbon or graphite rods. The easiShaper™ produces more consistent, smooth and uniform carbon tips than any hand shaper. It is designed for cutting single and double stepped carbon rods (used in the Cressington carbon coaters).

The cutting head incorporates two tungsten carbide cutting blades, a top guiding bearing and vortex design to keep the carbon dust in the dust collector. A blade setting gauge is included to reliably set the cutting blades for a single step of 1mm or double steps with 1.65mm and 3.8mm.

The easiShaper™ carbon rod shaper is ideally suited for busy, multiple user labs, high throughput microprobe labs, and presents a clean alternative to hand rod shapers. The easiShaper™ carbon rod shaper includes a carbon rod holder for the common 6mm carbon rods. Additional holders for 3mm and 4.75mm carbon rods are available as an option.

The carbon rod holder holds the carbon rod and is inserted in the top guiding bearing to produce precision cut tips. The integrated carbon dust collector is easily removed for cleaning and/or blade adjustment. The vertical design of the unit makes operation easy and saves valuable space. Universal power supply for 100-240V and 50/60Hz. UL listed and CE certified.

Features

• Easy, quick, precise and clean carbon rod shaping
• Supports 1/4", 1/8" and 3/16" carbon rods
• Shapes single and double stepped carbon rods
• Integrated dust collector
• Ergonomic & space saving design
• Easy cutting blade adjustment

Specifications
Carbon rod sizes	6mm (1/4"), 4.75mm (3/16") and 3mm (1/8")
Shaped steps	Single or double steps
Cutting blades	2350 rpm
Cutter speed	2350 rpm
Height	168mm
Diameter	114mm
Collector capacity	56ml
Humidity range	8 -90%
Weight	2.07kg
Power requirements	100-240V, 47-63Hz
Power rating	1.2A@115V or 0.6A@230V

Replacement parts and optional accessories
VP58-10 Cutting head assembly - included
VP58-12 Cutting blades - included
VP58-20 Carbon dust collector - included
VP58-8 Carbon rod holder for 3mm rods - optional
VP58-16 Carbon rod holder for 4.75mm rods - optional
VP58-4 Carbon rod holder for 6mm rods - included
VP58-5 Setting gauge for single or double step - included

See also manual carbon rod sharpener. 

VP58 Carbon/graphite rod shaping tool, 100-240V AUD904.00 Availability
VP58-10 Additional cutting head assembly for VP58 AUD313.00 Availability
VP58-12 Replacement cutting blades for VP58 AUD32.00 /pk/2 Availability
VP58-16 Additional carbon rod holder for 4.75mm rods for VP58 AUD78.00 Availability
VP58-20 Replacement dust collector container for VP58 AUD135.00 Availability
VP58-4 Replacement carbon rod holder for 6.35mm rods for VP58 AUD78.00 Availability
VP58-5 Replacement blade setting gauge for single or double step for VP58 AUD39.00 Availability
VP58-8 Additional carbon rod holder for 3mm rods for VP58 AUD78.00 Availability

MOLYBDENUM BOATS
These are well suited for heat cleaning of molybdenum or tantalum apertures and the evaporation of powders. To clean apertures: pre-clean aperture in solvent (chloroform).
Place aperture in boat and bring to 10^-4 pascal. Heat for 5 minutes to cherry-red only. Leave to cool prior to venting.
Thickness 0.05mm, total length 75mm. Trough: 12mm long x 6mm wide x 1mm deep, pk/5.

V021 Molybdenum boats, 75mm long, 12 x 6mm trough AUD31.00 /pk/5 Available

TUNGSTEN ALUMINA BOATS for cleaning molybdenum apertures and evaporation
V028 and V029 are a combination of the refractory metal tungsten and an alumina barrier (Al₂O₃) coating over the tab area. The exposed metal area comprising the bottom of the boat allows the sample to be in good thermal contact with the source. The barrier will tend to help concentrate the heat towards the center. The alumina barrier will inhibit an evaporant (if used as a sample instead of an aperture) from creeping toward the heat sink or from wetting the entire boat.
V028: Boat 82.5 x 12.7mm, trough 19 x 6.3 x 2.4mm deep.
V039: Boat 101.6 x 25.4mm, trough 44.5 x 16 x 2.4mm deep.
V030 replaces alumina crucibles for some specific applications. Good heat transfer yet has alumina inertness. Evaporant does not wet the alumina: no resistant change of the boat when evaporant melts. Due to the non-wetting characteristic, the evaporant forms a sphere when melted, resulting in a point source.
Boat 101.6 x 12.7mm, dimple Ø 12.7 x 3.2mm deep.
Melting point of tungsten boats with coated Al₂O₃ tabs: 3422°C.

V028 Alumina coated tungsten boats, trough 19 x 6.3mm AUD110.00 /pk/5 Available
V029 Alumina coated tungsten boats, trough 44.5 x 16mm AUD165.00 /pk/5 Availability
V030 Alumina coated tungsten boats, 12.7 x 3.2mm dimple AUD93.00 /pk/5 Available

TUNGSTEN WIRE BASKETS
Heavy duty, 8mm Ø x 10mm depth, 8 turns, overall length 110mm. 0.5mm Ø wire. 2/pkt.

V018 Tungsten basket AUD15.00 /pk/2 10% discount for 10 Available

MOLYBDENUM FOIL
For self-made boats, for the evaporation of powders and heat cleaning of molybdenum and tungsten apertures. 150 x 150mm and 0.05mm thick.

V024 Molybdenum foil, 0.05mm thick, 152mm x 152mm AUD114.00 /pk/1 Available

PLASTIC REPLICATING SHEETS
These sheets are available in two different plastics and three thicknesses. The material softens in Acetone and can be applied and gently pressed against a surface which was also wetted with acetone. Stripped off when dry, the replicas will hold a negative image of the replicated surface for inspection by scanning or light microscopy.
For TEM a second replica made by the evaporation of carbon and metal will produce a high resolution positive replica. Smoother and finer detail replicas require thinner replicating film. So the Triphan is better suited to the reproduction of highly sculptured surfaces.
Note: Cut pieces of film roughly rectangular (hold with tweezers), then snip off one corner (top right is the convention for notching sheet-films) Then place the film face down onto the surface to be replicated. Later, with the replica facing you, the cut corner will be in the top right position (or bottom left) and so you know which side is the replica.
20 sheets per packet.
User notes
V112 Cellulose acetate 35µm thick, 150 x 100mm AUD37.00 /pk/20 Available

CELLULOSE ACETATE REPLICATING TAPES
Cellulose acetate tapes soften in acetone and can be applied to a surface which has been wetted with acetone. They are stripped off when dry. A thickness of 22µm is used for finer detail replication.
Roll/4.5m

V116-02225 Replicating tape, cellulose acetate, 22µm, 25mm wide AUD13.00 /roll Available
V116-02238 Replicating tape, cellulose acetate, 22µm, 38mm wide AUD13.00 /roll Available
V116-12525 Replicating tape, cellulose acetate, 125µm, 25mm wide AUD20.00 /roll Available

SILICONE SEM REPLICATION KIT
The President SEM replication kit is a two component silicone based moulding material with excellent low viscosity forming properties for high definition of fine structures. Polymerisation time is only 5-7 minutes and moulds can be removed from samples directly after polymerisation to obtain a negative mold.
Applications can vary from replication of biological materials to achieve a stable surface or replication of processes like damage, wear or strain on large structures.
The President replication kit can be used easily in the field and replaces the need to use fixative on suitable biological material. The silicone moulds can be filled with Spurr to obtain a positive mould of the original surface and coated with Au or Au/Pd using a sputter coater. We advise to use Spurr since it has a low viscosity and provides excellent structure definition.
President replication kit yields good results with relatively long 10-30µm microstructures with aspect ratios from 1-20, and is capable of resolving small structures down to 20nm.

Kit contents:
53mL base, 53mL catalyst, 6 x 30mL mixing cups and 6 wooden stirring sticks.

Reference:
Visualization of native Surfaces by Two-Step Molding , Stanislav, N.Gorb, Microscopy Today 15/2 March 2007, Page 44-46 (pdf)



V120 President SEM high resolution replication kit AUD91.00 /kit Available