GELATINE CAPSULES
Natural, hard gelatine capsules. To be used as an embedding mould for water miscible resins, or resins which need to be cured by transmitted light. For non-water miscible resins, dry capsules in a 60°C oven. Gelatine capsules dissolve or disintegrate within 5 minutes when immersed in a 0.5% HCl solution at 36-38°C, within 2 minutes in artificial gastric juice at 37°C or in hot, about 60°C, water.
Suitable for embedding in resins which require UV or other light polymerisation.
Larger gelatine capsules, up to 66 x 22mm, are available on indent (2 weeks). These are ideal for storing delicate or small items. They may also be used as embedding moulds for paraffin or paraplast. The large capsules have a locking ring. A variety of sizes is available.

Cat. No.	Size	Diameter (mm)	Volume (mL)
RL039	000	9.55	1.37
RL040	00	8	1
RL041	0	7	0.8
RL042	1	6	0.5
RL045	4	5.05	0.21

RL039 Gelatine capsules size 000 AUD85.00 /pk/1000 Availability
RL040 Gelatine capsules, size 00 AUD36.00 /pk/1000 Availability
RL041 Gelatine capsules size 0 AUD31.00 /pk/1000 Available
RL042 Gelatine capsules, size 1 AUD32.00 /pk/1000 Availability
RL045 Gelatine capsules size 4 AUD40.00 /pk/1000 Availability

BEEM® EMBEDDING CAPSULES
Easy embedding and specimen trimming using disposable polyethylene capsules.
Standard capsules, size 00. Pre-shaped truncated pyramid tip with 1x1mm face to reduce trimming.
Conical capsules, size 00. For very small quantities, pelleting or suspensions or for long, thin specimens.
Bottle-neck capsules, size 00. For special problems where centrifugation is required or where elongation of the embedding space would be helpful because of sample shape.
Small capsules, size 3 and same design as RB001.

RB001	Standard embedding capsules, ID8mm	100
RB002	Conical embedding capsules, ID7.9mm	100
RB003	Bottle-neck embedding capsules, ID7.9mm	100
RB004	Small embedding capsules, 5.6mm	100

RB001 BEEM® embedding capsules, size 00, standard, ID8mm AUD22.00 /pk/100 10% discount for 10 Available
RB002 BEEM® embedding capsules, size 00, conical AUD22.00 /pk/100 10% discount for 10 Available
RB003 BEEM® embedding capsules, size 00, bottle-neck AUD22.00 /pk/100 10% discount for 10 Available
RB004 BEEM® embedding capsules, size 3, small AUD22.00 /pk/100 10% discount for 10 Available

MICROMOULDS
A unitised polyethylene mould of 10 capsules, self-supporting and numbered 1 -10. The 8mm mould produces size 00 blocks which have a pyramid-shaped tip with a 1mm square top.

RL063 Micromoulds, 10 x size 00 AUD22.00 /pk/10 Available

BLOCK EMBEDDING MOULDS
Introducing the EM5 - an innovative new design based on the widely used Ø8 mm size embedding mould. The unique two part design allows for easy removal of resin blocks, as well as incorporating many other advantages over currently available embedding products.

Features

• Separate base and tube sections that clip together to form the familiar capsule shape.
• Care should be taken that each component is free of debris before attaching together, to ensure a proper seal.
• Easy removal of resin blocks achieved by simply pulling the mould apart by hand.
• The mould can produce blocks up to 20mm in length, however shorter blocks (˜14mm) allow for easier removal. No razor blades or capsule presses are required.
• The detachable cap section allows for easier access and manipulation of a specimen.
• For more accurate specimen alignment a small amount of resin can be cured or partially cured before clipping to the body and completing the resin block. When fully cured they form strong homogeneous blocks.
• Each mould can be clipped to other moulds, allowing for the creation of trays of desired size. For volatile resins, another cap section can be clipped on to the top of the mould, creating an air tight seal.
• Each cavity is numbered 1 < 5, whilst the end support stands have designated areas for writing indexing numbers or comments.

2 part - Ø8mm body with 2mm cylindrical cone cap	Multiple array
EM5-8B/PP 5 Block Ø8mm body. Material: Polypropylene	EM5-8C-C/PP 5 Block 2mm cylindrical cone cap. Material: Polypropylene

REM5-8A-C Block embedding mould, 8mm body, 2mm cylindrical cap AUD49.00 /pk/10 Available

EASY MOULDS for resin
A convenient mould which offers these features:

• Trays-and-moulds are self standing.
  There is no need for a holding tray.
• Easy orientation of specimens.
  Tip of mould is only 0.3mm thick and is transparent. This makes specimen orientation possible.
• They form a universal block.
  Easy Mould tips have a flat block face, wide enough for large specimens. The design prevents air bubble trapping. Additionally, a marking gives a guide to the correct position for clamping.
• Free airflow for even polymerisation.
  Easy Mould trays raise the moulds away from the surface of the oven and allows air of a constant temperature to circulate freely and evenly around the specimen.
• Sealing of Capsules
  When using acrylates or other volatile or air reacting embedding media (LR White, GMA, HPMA), the moulds may be sealed by placing another Easy Mould on top. With a little pressure a perfect seal is obtained.
• Easy to Remove the Polymerised Block
  Simply push the bottom of the mould and the block pops out. No need for razor blades or a capsule press.
• Convenient Storage of Sectioned Blocks.
  Each cavity is numbered and additional data can be written on the trays. Used Easy Moulds are ideal for the storage of sectioned blocks. Trays stack well.
• Technical Specifications:
  Each tray contains 2x10 block moulds and measures 87 x 66mm. They are available in size 00:
  • Size 8mm diameter which corresponds to gelatine and BEEM™ capsule size 00 for a 3mm block face.

Cat. Number	Description	Carton quantity
R051	Easy Mould, Size 00 (8mm diam.)	5 trays or 50 trays

R051 Easy moulds, 20 x size 00 AUD45.00 /5 trays 10% discount for 10 Available

SILICONE BLOCK MOULDS
These reusable, long-life moulds produce size "00" pre-shaped blocks which "pop" from the mould - no razor needed. For normal or high temperature rapid embedding (100°C). Not recommended for acrylic resins. Recommended for epoxy resins, though mould life is somewhat reduced with low viscosity types.

RL068-24 Silicone block mould, 24 x size 00 AUD73.00 Available
RL068-30 Silicone block mould, 30 x size 00 AUD73.00 Available

BEEM CAPSULE HOLDERS
For holding BEEM capsules during embedding and curing.

RB011 BEEM® capsule holder, 22 x size 00 AUD25.00 10% discount for 6 Available
RB012 BEEM® capsule holder, 22 x size 3 AUD20.00 10% discount for 6 Available

BEEM® CAPSULE HOLDER FOR UV CURING
These translucent BEEM® capsule holders are perfect for microwaving or UV polymerising of embedding media. Made from polypropylene. Suitable for all embedding capsules size 00.

UV/ Cryo chamber on page Y2

RB010 BEEM® capsule holder, PP, 22 x size 00, for UV curing AUD29.00 10% discount for 6 Availability

GELATINE CAPSULE HOLDER
Made from durable polyethylene. It accommodates 15 gelatine capsules size "00". The whole capsule is exposed to allow for even heat and/or UV light distribution during polymerisation.
Measurements: 127mm x 76mm.

RL030 Gelatine capsule holder, PE, 15 x size 00 AUD22.00 Available