Plastic tubes & vials on page L9

Tube racks on page L12

TEST TUBES WITHOUT RIM borosilicate glass
Test tubes with round bases, unmarked.

L694 can have an OD of 36mm and display a small, white logo and measurements (36x220), or an OD of 38mm without writing. If this matters, please advise.

Cat. No.	Length (mm)	OD (mm)	ID (mm)
L680	75	10	6.8
L682	100	12	10.0
L685	100	15	12.9
L688	180	18	15.5
L690	200	21	18.5
L692	180	25	22.5
L694	220	37	34.4

OD - Outer diameter, ID - Internal Diameter

L680 Test tubes without rim, glass, 10 x 75mm AUD13.00 /box/100 10% discount for 10 Available
L682 Test tubes without rim, glass, 12x100mm AUD17.00 /box/100 10% discount for 10 Available
L685 Test tubes without rim, glass, 15x100mm AUD23.00 /box/100 10% discount for 10 Available
L688 Test tubes without rim, glass, 18x180mm AUD36.00 /box/100 10% discount for 10 Available
L690 Test tubes without rim, glass, 21 x 200mm AUD26.00 /pk/50 10% discount for 10 Available
L692 Test tubes without rim, glass, 25 x 180mm AUD59.00 /box/100 10% discount for 10 Available
L694 Test tubes without rim, glass, 36 x 220mm AUD32.00 /pk/20 10% discount for 10 Available

VERY LARGE GLASS TEST TUBES
Test tube with rim, borosilicate glass 3.3 (Pyrex like).
Some tubes display the measurements in small white numbers (36x200) and the length is 200mm. If this matters, please advise.

Cat. No.	Volume (mL)	Length (mm)	ID (mm)	OD (mm)	Rim OD (mm)
L689	240	220	35	37.5	41

L689 Test tubes with rim, glass, 36 x 220mm AUD22.00 /pk/10 20% discount for 10 Available

TEST TUBES WITH GLASS STOPPER borosilicate glass
Well sealing ground glass joints.

Length ~152mm x Diameter ~20mm. Rim at top: Outer Diameter ~21mm, Inner Diameter ~14.45mm.
Length excludes the glass stopper, measured from the base to the top of the rim.


L676 Test tubes, glass, with glass stopper, 20mL AUD20.00 /pk/5 10% discount for 5 Available

CENTRIFUGE TUBES borosilicate glass

Cat. No.	External diameter	Top rim	Graduation	Total capacity
LCA20	20mm	21.5mm	Blue graduations to 15mL in 0.2mL increments	22mL
LCA24	21mm	25mm	Brown graduations to 25mL in 0.1mL increments	40mL
LCA30	36mm	No rim	White graduations to 50mL in 0.1mL increments	88mL
LCA32	40mm	No rim	White graduations to 100mL in 0.2mL increments	140mL

LCA20 Centrifuge tubes, glass, graduated, conical, 15mL AUD12.00 /pk/10 10% discount for 10 Available
LCA24 Centrifuge tubes, glass, graduated, conical, 25mL AUD20.00 /pk/10 10% discount for 10 Available
LCA30 Centrifuge tubes, glass, graduated, round bottom, 50mL AUD24.00 /pk/10 10% discount for 10 Available
LCA32 Centrifuge tubes, glass, graduated, round bottom, 100mL AUD30.00 /pk/10 10% discount for 10 Available

SAMPLE VIALS clear borosilicate glass, Type I
Well made, thin walled glass vials.
Caps available separately.

Dimensions without cap

Cat. No.	Volume (mL)	OD x Length (mm)	Neck OD (mm)	Neck ID (mm)	Matching caps
L6202	2	11.6 x 32	8	5.1	L6202-CAP
L6204	4	14.75 x 45	13	8.1	L6204-CAP
L6206	6	19 x 44.4	18	11.75	L6206-CAP
L6211	11	22 x 55	18	11.5	L6206-CAP
L6215	15	22.5 x 57.2	20		L6217-CAP
L6217	17	22 x 69.8	20	13.3	L6217-CAP
L6221	21	27 x 57.2	22	15.0	L6221-CAP
L6225	25	27 x 76	22		L6221-CAP
L6227	27		22	15.1	L6221-CAP
L6236	36	29 x 81	24	17.3	L6250-CAP
L6250	50	30 x 100	24	17.4	L6250-CAP

Cat. No. = Catalogue Number, Length = Length of vial, OD = Outside diameter of vial, Neck ID = Diameter of opening
High density polypropylene screw caps are available separately, see below.

Vials can fit labels up to these approximate sizes

Cat. No.	Circumference of Vial (mm)	Height (mm)
L6202	40	20
L6206	60	25
L6211	70	35
L6217	70	55
L6221	85	40
L6227	90	55
L6236	90	65
L6250	95	80

L6202 Sample vials, clear glass, 8mm neck, 2mL AUD15.00 /tray/100 15% discount for 10 Available
L6204 Sample vials, clear glass, 13mm neck, 4mL AUD23.00 /tray/100 15% discount for 12 Available
L6206 Sample vials, clear glass, 18mm neck, 6mL AUD39.00 /tray/208 15% discount for 12 Available
L6211 Sample vials, clear glass, 18mm neck, 11mL AUD31.00 /tray/198 15% discount for 10 Available
L6215 Sample vials, clear glass, 20mm neck, 15mL AUD26.00 /tray/91 15% discount for 12 Available
L6217 Sample vials, clear glass, 20mm neck, 17mL AUD49.00 /tray/99 15% discount for 10 Available
L6221 Sample vials, clear glass, 22mm neck, 21mL AUD41.00 /tray/99 15% discount for 10 Available
L6225 Sample vials, clear glass, 22mm neck, 25mL AUD37.00 /tray/99 15% discount for 8 Availability
L6227 Sample vials, clear glass, 22mm neck, 27mL AUD80.00 /tray/122 15% discount for 8 Available
L6236 Sample vials, clear glass, 24mm neck, 36mL AUD65.00 /tray/85 15% discount for 8 Available
L6250 Sample vials, clear glass, 24mm neck, 50mL AUD64.00 /tray/80 15% discount for 12 Available

SAMPLE VIALS WITH SCREW CAPS amber borosilicate glass, Type I
The 7mL vials are made of neutral borosilicate glass.
The 20mL vials are made of low borosilicate glass.

Dimensions without cap

Cat. No.	Volume (mL)	Height w/o cap (mm)	Vial OD (mm)	Neck ID (mm)	Matching caps
L6207A	7	39	21.5	11	L6206-CAP
L6220A	20	55	29	17	L6250-CAP

High density polypropylene screw caps are available separately, see below.

Vials can fit labels up to these approximate sizes

Cat. No.	Circumference of Vial (mm)	Height (mm)
L6207A	70	20
L6220A	90	40

L6207A Sample vials, amber glass, 7mL AUD78.00 /tray/204 15% discount for 10 Available
L6220A Sample vials, amber glass, 20mL AUD42.00 /tray/85 15% discount for 10 Available

SCREW CAPS FOR SAMPLE VIALS, PP
High density polypropylene screw caps, white except for the smallest, which is black.
The caps have no liner (except L6204-CAP), but twin raised rings which seal against the lip of the vial. So the properties of HD PP are those of the seal. The seal is positive and the vials do not leak when tightened and the glass rim is in good condition.

Caps and matching vials

Cat. No.	Cap size (mm)	Matching vials
L6202-CAP	8	L6202 - 2mL vials
L6204-CAP	13	L6204 - 4mL vials, this cap has a wadding liner
L6206-CAP	18	L6206 - 6mL vials, L6207A - 7mL vials, L6211 - 11mL vials
L6217-CAP	20	L6217 - 17mL vials, L642-25 dropper bottles on page L7
L6221-CAP	22	L6221 - 21mL vials, L6227 - 27mL vials
L6250-CAP	24	L6220A - 20mL vials, L6236 - 36mL vials, L6250 - 50mL vials

L6202-CAP Black screw caps, PP, 8mm, for 2mL vials AUD18.00 /pk/100 20% discount for 10 Available
L6204-CAP White screw caps, PP, 13mm, with wad, for 4mL vials AUD34.00 /pk/100 20% discount for 10 Available
L6206-CAP White screw caps, PP, 18mm, for 6mL, 7mL, 11mL vials AUD14.00 /pk/100 20% discount for 10 Available
L6217-CAP White screw caps, PP, 20mm, for 17mL vials AUD11.00 /pk/100 20% discount for 10 Available
L6221-CAP White screw caps, PP, 22mm, for 21mL, 27mL vials AUD19.00 /pk/100 20% discount for 10 Available
L6250-CAP White screw caps, PP, 24mm, for 20mL, 36mL, 50mL vials AUD20.00 /pk/100 20% discount for 10 Available

CLEAR GLASS SAMPLE VIALS WITH LINED ALUMINIUM SCREW CAPS
Borosilicate glass vials with non-toxic rubber liner in the aluminium screw cap.

Cat. No.	Volume (mL)	Height w/o cap (mm)	Height with cap (mm)	Cap OD (mm)	Neck ID (mm)	Vial OD (mm)
L629-30	30	85.1	86.4	28.6	20.6	28

L629-30 Sample vials, clear glass, with lined aluminium screw caps, 30mL AUD79.00 /pk/125 10% discount for 4 Available

CLEAR WHEATON SAMPLE VIALS with screw cap
Wheaton-33 low extractable borosilicate glass protects against changes of pH and maintains purity of contents. Vials and caps can be sterilised and stored at low temperatures. Screw caps have white (styrene-butadiene) rubber liner.

Note: These vials will be discontinued when sold. See sample vials above.

Priced to clear, below cost!
L6502 Sample vials, 12mm D x 38mm H, 2mL AUD261.00 /case/288 Available

SAMPLE VIALS WITH PUSH-IN CAPS
Type I borosilicate glass. The caps are made of LDPE.
Caps available separately.

Cat. No.	Total volume (mL)	Height of vial (mm)	OD vial (mm)	ID neck (mm)
L626-04	4.5	47	13	10
L626-18	20.1	49.5	25	22

L626-04 Sample vials, clear glass, 4mL AUD96.00 /tray/494 15% discount for 8 Available
L626-04C Push-in caps for 4mL sample vials AUD14.00 /pk/100 10% discount for 10 Available
L626-18 Sample vials, clear glass, 18mL AUD45.00 /tray/100 15% discount for 10 Available
L626-18C Push-in caps for 18mL sample vials AUD20.00 /pk/100 10% discount for 10 Available

GLASS SNAP-CAP VIALS
Pre-attached low density polyethylene snap-caps. These bottles are ideal for collecting, storing, and exhibiting a wide variety of specimens in the lab or field. The caps snap over a special sealing ring to form an effective moisture barrier. The bottles are packed in a carton constructed of corrugated trays with partitions. They are made from Wheaton 800 soda-lime clear glass that conforms to USP Type III requirements.

L6416 Glass snap-cap vials, 30mm D x 40mm H, 16mL AUD291.00 /case/144 Available

AUTOSAMPLER VIALS amber borosilicate glass, Type I
Autosampler vials, 12 x 32mm, 9mm screw finish, endotoxin-free. The PP caps have red PTFE septa suitable for up to 1000 injections.

25% Discount for carton/5000.

Cat. No.	Volume (mL)	Height w/o cap (mm)	Height with cap (mm)	Cap OD (mm)	Neck ID (mm)	Vial OD (mm)
L6602A	2	32.1	33.7	11.50	5.85	11.55

L6602A Autosampler vials, amber borosilicate, screw caps with PTFE septa, 2mL AUD49.00 /box/100 15% discount for 10 Available

SERUM VIALS clear and amber borosilicate glass, Type I
Crimp caps available separately, see below.
These injection vials may be filled with whatever product; they are then sealed with a chlorobutyl rubber stopper. An aluminium cap is placed on top and crimped. The product can be autoclaved if required. For use just remove the plastic flip-top on the crimp cap. With this design the crimp cap stays in place and the contents can only be added to or withdrawn using a syringe needle. With the central part of the flip top removed it is obvious that the vial has been used but the rubber stopper has not been opened.
The rubber seal will not allow microorganisms to enter the vial when penetrating that seal with a sterile needle. Because a vacuum forms during withdrawal, a little air is usually injected into the vial. Theoretically this could add few microorganisms and therefore used vials should be refrigerated. Vials, stoppers and crimps (in different colours) are separate items; crimping and decrimping tools for the two sizes are also available.

Note: The 50mL amber vials are moulded and made from Type II sulphur-treated and washed soda-lime glass.

Cat. No.	Volume (mL)	Total volume (mL)	ID of neck (mm)	OD of neck (mm)
L6303 (now L630-03 see below)	3	4.20	8	13
L6310 (discontinued, see L630-10 below)	10	13.00	12.5	20
L6310A	10	13.80	12.5	20
L6320 (discontinued, see L630-23 below)	20	23.40	12.5	20
L6320A	20	26.80	12.5	20
L6330 (discontinued, see L634-30 below)	30	34.40	12.5	20
L6350 (discontinued, see L634-50 below)	50	60	12.5	20
L6350A (discontinued, see L635-50 below)	50	60	12.5	20

L6310 Serum vials, clear glass, 10mL - discontinued, see L630-10
L6310A Serum vials, amber glass, 10mL AUD43.00 /tray/126 15% discount for 12 Available
L6320A Serum vials, amber glass, 20mL AUD95.00 /tray/113 15% discount for 10 Available

SERUM VIALS, CLEAR BOROSILICATE GLASS TYPE I
Injection vials with crimp finish, low borosilicate glass, Type I.

Note: We now have an alternative 10mL vial, which will be available until we can get the regular vial again. Please note the slightly different dimensions.

Cat. No.	Volume (mL)	Vial OD (mm)	Height (mm)	Neck OD (mm)
L630-03	3	16.25	38.75	13
L630-10	10	22.00	48.20	20
L630-23	23	29.00	59.50	20

L630-03 Serum vials, clear glass Type I, 13mm neck, 3mL AUD41.00 /tray/306 15% discount for 10 Available
L630-10 Serum vials, clear glass Type I, 20mm neck, 10mL AUD58.00 /tray/280 15% discount for 7 Availability
L630-10AD Serum vials, clear glass Type I, 20mm neck, 10mL, 20.5 x 56.5mm AUD42.00 /tray/185 15% discount for 10 Available
L630-23 Serum vials, clear glass Type I, 20mm neck, 23mL AUD37.00 /tray/85 15% discount for 10 Available

SERUM VIALS, CLEAR MOULDED GLASS TYPE I
Moulded injection bottles with crimp finish, neutral borosilicate glass.
Molten Type I glass is formed and moulded with compressed air, where the vials are held for a short time to retain shape. They are transferred to annealing lehrs, heated to 600°C and slowly cooled to remove stress points.
Type I glass containers are suitable for most preparations, whether or not for parenteral use.

Cat. No.	Volume (mL)	Vial OD (mm)	Height (mm)	Neck OD (mm)
L634-30	30	37.8	61.5	20
L634-50	50	42.5	73.0	20

L634-30 Serum vials, clear moulded glass Type I, 20mm neck, 30mL AUD57.00 /tray/92 15% discount for 3 Available
L634-50 Serum vials, clear moulded glass Type I, 20mm neck, 50mL AUD58.00 /tray/81 15% discount for 3 Available

SERUM VIALS, AMBER MOULDED GLASS TYPE II
Amber moulded glass injection bottles correspond to the light transmission limits stipulated in USP and BP.
Type II glass is suitable for injection solutions that have a neutral or acidic pH.

Cat. No.	Volume (mL)	Vial OD (mm)	Height (mm)	Neck OD (mm)
L635-30	30	36	62.8	20
L635-50	50	42.5	73.0	20

L635-30 Serum vials, amber moulded glass Type II, 20mm neck, 30mL AUD53.00 /tray/92 15% discount for 6 Available
L635-50 Serum vials, amber moulded glass Type II, 20mm neck, 50mL AUD52.00 /tray/84 15% discount for 4 Available

FLIP-OFF CRIMP CAPS
These aluminium caps have a coloured plastic flip-top. When first used, a small metal part is torn away, which shows that the vial has been used since last sealed. The centre of the aluminium cap then remains open, with the vial still sealed by the stopper.

L63F-13B Crimp caps, flip-off, 13mm, blue AUD8.00 /pk/200 10% discount for 10 Available
L63F-13R Crimp caps, flip-off, 13mm, red AUD8.00 /pk/200 10% discount for 10 Available
L63F-20B Crimp caps, flip-off, 20mm, blue AUD8.00 /pk/200 10% discount for 10 Available
L63F-20G Crimp caps, flip-off, 20mm, green AUD8.00 /pk/200 10% discount for 10 Available
L63F-20R Crimp caps, flip-off, 20mm, red AUD8.00 /pk/200 10% discount for 10 Available
L63F-20Y Crimp caps, flip-off, 20mm, yellow AUD8.00 /pk/200 10% discount for 10 Available

CRIMP CAPS, CENTRE TEAR-OUT

L63C-13S Crimp caps, centre tear-out, 13mm, silver AUD9.00 /pk/200 10% discount for 10 Available
L63C-20B Crimp caps, centre tear-out, 20mm, blue AUD8.00 /pk/200 10% discount for 10 Available
L63C-20R Crimp caps, centre tear-out, 20mm, red AUD8.00 /pk/200 10% discount for 10 Available
L63C-20S Crimp caps, centre tear-out, 20mm, silver AUD8.00 /pk/200 10% discount for 10 Available

RUBBER STOPPERS FOR SERUM VIALS, PLUG AND 2-PRONG
Chlorobutyl rubber stoppers - plugs for liquids, 2-prong for freeze-dried samples.

L63RS-13PL Rubber stoppers for serum vials, 13mm, plug AUD10.00 /pk/200 10% discount for 10 Available
L63RS-13PR Rubber stoppers for serum vials, 13mm, 2-prong AUD11.00 /pk/200 10% discount for 10 Available
L63RS-20PL Rubber stoppers for serum vials, 20mm, plug AUD16.00 /pk/200 10% discount for 10 Available
L63RS-20PR Rubber stoppers for serum vials, 20mm, 2-prong AUD18.00 /pk/200 10% discount for 10 Available

CRIMPERS & DECRIMPERS
Hand operated crimping tools. Zinc plated crimping jaws attach aluminium seals and caps to serum vials quickly and easily. Manufactured with an adjustable stop which allows the operator to determine the tightness of the seal and ensures consistent crimping.

Flip-off and centre tear-out caps need different crimpers, but the decrimpers are suitable for both cap styles.

L63TC-13C Crimping tool for 13mm centre tear-out caps AUD295.00 Available
L63TC-13F Crimping tool for 13mm flip-off caps AUD301.00 Availability
L63TC-20C Crimping tool for 20mm centre tear-out caps AUD343.00 Available
L63TC-20F Crimping tool for 20mm flip-off caps AUD336.00 Availability
L63TD-13 Decrimping tool for 13mm caps AUD311.00 Available
L63TD-20 Decrimping tool for 20mm caps AUD308.00 Available