• Hanna brand magnetic stirrer units on page E3
• Shipping dimensions and weights of incubators, ovens, furnaces, hot plates, waterbaths and steambaths.

BENCHBLOTTER™ ROCKER
The BenchBlotter™ is the first rocker to be specifically optimised with the ideal rocking speed and tilt angle for blot washing, gel staining/destaining and hybridisation applications. Available with an optional dual platform accessory, the BenchBlotter™ offers a sizeable work space, while maintaining a compact footprint and low profile design.

Features

• Optimised for blot washing and gel staining/destaining
• Gentle mixing (12 rpm and +/-8° tilt)
• Compact, low profile design
• Lightweight and easy to carry
• Optional stacking platform expands workspace, clearance 70mm
• Safe for incubator / cold room use
• Large load capacity (3kg)

An optional dimpled mat for centrifuge tubes and multiple platform tie-down points, make this rocker suitable for a wide variety of general purpose applications.

Bungee cords for tying containers to the platform are available separately - see EB1718-BC below

Specifications
Speed	Fixed at 10rpm
Tilt angle	+/- 8º
Platform size	300 x 300mm
Work surface	Non-skid rubber mat
Load capacity	3.2kg
Operating temperature range	+4ºC to +65ºC
Dimensions	340 x 300 x 120mm
Weight	3kg
Warranty	2 Years
Electrical	230V AC, 50Hz, 0.2A

EB1000 BenchBlotter™ rocker, 300 x 300mm AUD483.00 stock?
EB1000-MD Rubber mat, dimpled, 300 x 300mm AUD45.00 stock?
EB1000-MF Rubber mat, flat, 300 x 300mm AUD39.00 stock?
EB1000-SPD Stacking platform with dimpled mat, 300 x 300mm AUD128.00 stock?
EB1000-SPF Stacking platform with flat mat, 300 x 300mm AUD125.00 stock?

BENCHROCKER™ 2D ROCKER
This rocker is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results.

Features

• Multi-purpose - many applications
• Two dimensional mixing
• Adjustable speed and tilt angle
• Optional stacking platform expands workspace, clearance 70mm
• Safe for incubator/coldroom use
• Platform mats are autoclavable
• Brushless motors are maintenance free
  
  

The rocking speed and tilt angle are easily adjusted in seconds. At low speeds and minimal tilt angles, the rocker provides a gentle wave effect for non-foaming mixing, as is required for most blot washing and gel electrophoresis work. When set to higher speeds and more extreme tilt angles, it produces aggressive agitation for vigorous sample mixing.

Bungee cords for tying containers to the platform are available separately - see EB1718-BC below

Specifications
Speed	Variable, 2 to 30rpm
Tilt angle	Variable, 0 to 30°
Platform size	356 x 300mm
Load capacity	2.0kg
Operating temperature range	+4ºC to +65ºC
Dimensions	350 x 300 x 200mm
Weight	3.4kg
Warranty	2 Years
Electrical	230V AC, 50Hz, 0.15A

EB2000 BenchRocker™ 2D rocker, 356 x 300mm AUD740.00 stock?
EB2000-MF Rubber mat, flat, 356 x 300mm AUD43.00 stock?
EB2000-SPF Stacking platform with flat mat, 356 x 300mm AUD141.00 stock?

BENCHROCKER™ 3D GYRATORY ROCKER
This rocker is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results.

Features

• Multi-purpose - many applications
• Three dimensional mixing
• Adjustable speed and tilt angle
• Optional stacking platform expands workspace, clearance 70mm
• Safe for incubator/coldroom use
• Platform mats are autoclavable
• Brushless motors are maintenance free

The rocking speed and tilt angle are easily adjusted in seconds. At low speeds and minimal tilt angles, the rocker provides a gentle wave effect for non-foaming mixing, as is required for most blot washing and gel electrophoresis work. When set to higher speeds and more extreme tilt angles, it produces aggressive agitation for vigorous sample mixing.

Optional accessories suitable for EB2300 are listed under BenchBlotter™ above:
EB1000-MD Rubber mat, dimpled, 300 x 300mm
EB1000-MF Rubber mat, flat, 300 x 300mm
EB1000-SPD Stacking platform with dimpled mat, 300 x 300mm
EB1000-SPF Stacking platform with flat mat, 300 x 300mm

Bungee cords for tying containers to the platform are available separately - see EB1718-BC below

Specifications
Speed	Variable, 2 to 30rpm
Tilt angle	Variable, 0 to 30º
Platform size (3D)	300 x 300mm
Load capacity	2kg
Operating temperature range	+4ºC to +65ºC
Dimensions (WxDxH)	350 x 300 x 200mm
Weight	3.4kg
Warranty	2 Years
Electrical	230V AC, 50Hz, 0.15A

EB2300 BenchRocker™ 3D gyratory rocker, 300 x 300mm AUD717.00 stock?

BLOTBOY™ 3D ROCKERS
These platform rockers provide the perfect 3-dimensional motion for all blot-related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing, staining and washing of boxes and other flat vessels, especially electrophoresis gels in trays.

Features

• Optimised speed and tilt for gel blotting, washing and staining
• Tri-directional motion for thorough, gentle mixing
• Compact design
• Optional stacking platform expands workspace, clearance 70mm
• Autoclavable flat mats included
• Maintenance-free brushless motor
• Incubator and cold room safe

Optional accessories suitable for EB1308 are listed under BenchBlotter™ above:
EB1000-MD Rubber mat, dimpled, 300 x 300mm
EB1000-MF Rubber mat, flat, 300 x 300mm
EB1000-SPD Stacking platform with dimpled mat, 300 x 300mm
EB1000-SPF Stacking platform with flat mat, 300 x 300mm

Bungee cords for tying containers to the platform are available separately - see EB1718-BC below

Specifications
Speed	10rpm
Tilt angle	+/-8º
Platform size
Mini BlotBoy	270 x 190mm
BlotBoy	300 x 300mm
Load capacity	1.6kg
Operating temperature range	+4ºC to +65ºC
Dimensions (WxDxH)
Mini BlotBoy	267 x 190 x 203 mm
BlotBoy	305 x 305 x 211 mm
Weight	2.0kg
Warranty	2 Years
Electrical	230V AC, 50Hz, 0.2A

EB1008 Mini BlotBoy™ 3D rocker, 267 x 191mm AUD396.00 stock?
EB1008-MD Rubber mat, dimpled, 267 x 191mm AUD38.00 stock?
EB1008-MF Rubber mat, flat, 267 x 191mm AUD36.00 stock?
EB1008-SPD Stacking platform with dimpled mat, 267 x 191mm AUD114.00 stock?
EB1008-SPF Stacking platform with flat mat, 267 x 191mm AUD113.00 stock?
EB1308 BlotBoy™ 3D rocker, 300 x 300mm AUD457.00 stock?

BUNGEE CORDS
Set of 4 bungee cords for tying containers to blotters, rockers and shakers. Expands from 180 to 460mm.

EB-BC Bungee cords, working length 180 - 460mm AUD25.00 /pk/4 stock?

STACKING PLATFORM LEG EXTENSIONS
These extensions can be attached to the legs of the stacking platforms to increase the space between two platforms by 32mm to 102mm.

EB-SPE Stacking platform leg extensions, 32mm AUD33.00 /pk/4 stock?

VORTEX SHAKERS WITH HEATING & COOLING
The MultiTherm™ vortex shaker is a temperature controlled vortexer, useful for a variety of molecular biology applications including:

• Denaturation of DNA, RNA and proteins
• Lipid extractions
• Yeast and bacteria cultivation
• Restriction digests
• Reverse transcription
• DNA/plasmid isolation
• Gentle thawing of biological materials

Eight different blocks accommodate all popular tubes and plates, including as many as six 50mL tubes. Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety and sample integrity.

EB5000-H Multi-Therm™ vortex shaker, heating AUD1,894.00 stock?
EB5000-HC Multi-Therm™ vortex shaker, heating/ cooling ask stock?
EB5000-MB1 Multi-Therm™ block for 96 x 0.2mL tubes or 1 PCR plate AUD333.00 stock?
EB5000-MB2 Multi-Therm™ block for 54 x 0.5mL tubes AUD289.00 stock?
EB5000-MB3 Multi-Therm™ block for 15 x 0.5mL tubes plus 20 x 1.5mL tubes AUD289.00 stock?
EB5000-MB4 Multi-Therm™ block for 35 x 1.5mL tubes AUD289.00 stock?
EB5000-MB5 Multi-Therm™ block for 35 x 2.0mL tubes AUD289.00 stock?
EB5000-MB6 Multi-Therm™ block for 24 x 12mL tubes AUD385.00 stock?
EB5000-MB7 Multi-Therm™ block for 12 x 15mL tubes AUD385.00 stock?
EB5000-MB8 Multi-Therm™ block for 6 x 50mL tubes AUD385.00 stock?

LOW SPEED ORBITAL SHAKER
The Orbi-Blotter™ is a low speed orbital shaker designed for gel blotting, staining/destaining and washing applications. It features a gentle orbital motion with speed control down to as little as 3rpm, making it the ideal orbital choice for low speed applications, such as blotting, washing, staining/destaining, etc. A large 350 x 300mm platform is included along with a non-slip rubber mat for holding trays, dishes, plates and other flat vessels.

Optional accessories
EB2000-SPF Stacking platform with flat mat, 356 x 300mm
EB-SPE Stacking platform leg extensions, 32mm

EBT30 Orbi-Blotter™ with rubber mat platform, 350 x 300mm AUD810.00 stock?

COMPACT ORBITAL SHAKER
The Orbi-Shaker™ JR is a compact orbital shaker with a 230 x 200mm non-slip rubber platform, ideal for tissue culture flasks, Petri dishes and staining trays. Incubator and cold-room safe.
Additional platforms are also available for the Orbi-Shaker™ JR, including the convenient MAGic Clamp™ platform (PATENT PENDING) for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.
Mixing speed and run time are displayed on the large LED control panel located on the front side of the unit. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Clamps available separately - see below.

Specifications
Speed range	30 to 300 rpm
Orbit	19mm
Platform dimensions
Standard (flat mat)	230 x 200mm
Universal (flask)	250 x 280mm
Exterior dimensions	280 x 270 x 130mm
Weight	5.5kg
Operating temperature	4 to 65°C
Electrical	230V, 50-60Hz*

EBT300 Orbi-Shaker™ JR with rubber mat platform, 230 x 200mm AUD1,104.00 stock?
EBT300-PMC MAGic Clamp™ universal platform for flasks and tube racks AUD329.00 stock?
EBT300-PR Roller platform, adjustable for uncommon vessels AUD362.00 stock?

LARGE CAPACITY ORBITAL SHAKER
The powerful Orbi-Shaker™ is capable of mixing a 6.35kg load up to speeds as high as 300rpm. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays.
The convenient MAGic Clamp platform (patent pending) is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.
Capacity: 24 x 125mL, 14 x 250mL, 9 x 500mL, 5 x 1L or 2 x 2L.

Common applications

• Bacterial suspensions
• Tissue/cell culture
• Solubility studies
• Staining/destaining
• Gel washing
• General mixing

Several dedicated platforms for Erlenmeyer flasks and culture plates are also available.

Clamps available separately - see item below.

Specifications
Speed range	30 to 300 rpm
Speed increment	1 rpm
Orbit	19mm
Maximum capacity	2 x 2L or 6kg
Platform dimensions
Included	330 x 300mm
MAGic Clamp™ platform	350 x 300mm
Exterior dimensions	280 x 330 x 75mm
Weight	11.5kg
Operating temperature	4 to 65°C
Electrical	230V, 50-60Hz*

EBT3000 Orbi-Shaker™ with rubber mat platform, 330 x 305mm AUD1,748.00 stock?
EBT3000-PMC MAGic Clamp™ universal platform for flasks and tube racks AUD329.00 stock?
EBT3000-PZ125 Platform for 12 x 125mL Erlenmeyer flasks AUD336.00 stock?
EBT3000-PZ250 Platform for 8 x 250mL Erlenmeyer flasks AUD336.00 stock?
EBT3000-PZ500 Platform for 5 x 500mL Erlenmeyer flasks AUD336.00 stock?
EBT3000-PZMP Platform for 4 standard microplates AUD534.00 stock?
EBT3000-PZSR Spring-rack platform for uncommon vessels AUD509.00 stock?

MAGNETIC CLAMPS FOR MAGic Clamp™ UNIVERSAL PLATFORMS
Maximum number of clamps to fit on EBT300-PMC and EBT3000-PMC:

                     EBT300           EBT3000
EBTMC-0050             20               30
EBTMC-0125             12               24
EBTMC-0250              8               14
EBTMC-0500              5                9
EBTMC-1000              4                5
EBTMC-2000             N/A               2
EBTMC-TR                1                2

EBTMC-TR tube rack fits 21 x 15mL and 12 x 50mL tubes.

EBTMC-0050 MAGic Clamp™ magnetic clamp for 50mL Erlenmeyer flask AUD46.00 10% discount for 4 stock?
EBTMC-0125 MAGic Clamp™ magnetic clamp for 125mL Erlenmeyer flask AUD47.00 10% discount for 4 stock?
EBTMC-0250 MAGic Clamp™ magnetic clamp for 250mL Erlenmeyer flask AUD49.00 10% discount for 4 stock?
EBTMC-0500 MAGic Clamp™ magnetic clamp for 500mL Erlenmeyer flask AUD50.00 10% discount for 5 stock?
EBTMC-1000 MAGic Clamp™ magnetic clamp for 1000mL Erlenmeyer flask AUD77.00 10% discount for 4 stock?
EBTMC-2000 MAGic Clamp™ magnetic clamp for 2000mL Erlenmeyer flask AUD93.00 10% discount for 2 stock?
EBTMC-TR MAGic Clamp™ magnetic tube rack for 15mL and 50mL tubes AUD123.00 10% discount for 2 stock?

ORBITAL SHAKER FOR MICROPLATES
The Orbi-Shaker MP™ is designed with a 3mm mixing orbit, optimised for thorough mixing of microplates (culture plates) and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs, clamps or tools.
A digital microprocessor ensures accurate speed control over the brushless, maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.

EBT1500 Orbi-Shaker™ MP with platform for 4 microplates AUD986.00 stock?
EBT1500-A02 Adapters for PCR plates, strips and 0.2mL tubes AUD76.00 /pk/4 stock?
EBT1500-A15 Adapters for 20 x 1.5/2.02mL tubes AUD97.00 /pk/2 stock?

3D MIXERS/ SHAKERS/ NUTATORS
These platform shakers provide a 3-dimensional, nutating motion for moderately aggressive mixing. Two platform sizes and two rubber mat configurations allow for thorough, foam-free mixing in blood tubes and centrifuge tubes, as well as in a variety of flat vessels.

Features

• Nutating motion for thorough, uniform mixing
• Autoclavable dimpled mats included, perfect for blood and centrifuge tubes
• Optional stacking platform expands workspace, clearance 70mm
• Incubator and cold room safe
• Maintenance-free brushless motors

Optional accessories suitable for EB1020 are listed under Mini BlotBoy™ above:
EB1008-MD Rubber mat, dimpled, 267 x 191mm
EB1008-MF Rubber mat, flat, 267 x 191mm
EB1008-SPD Stacking platform with dimpled mat, 267 x 191mm
EB1008-SPF Stacking platform with flat mat, 267 x 191mm

Optional accessories suitable for EB1320 are listed under BenchBlotter™ above:
EB1000-MD Rubber mat, dimpled, 300 x 300mm
EB1000-MF Rubber mat, flat, 300 x 300mm
EB1000-SPD Stacking platform with dimpled mat, 300 x 300mm
EB1000-SPF Stacking platform with flat mat, 300 x 300mm

Specifications
Speed	20rpm
Tilt angle	+/-20º
Platform size
MiniMixer	270 x 190mm
BioMixer	300 x 300mm
Load capacity	1.6kg
Operating temperature range	+4ºC to +65ºC
Dimensions (WxDxH)
MiniMixer	267 x 190 x 203mm
BioMixer	305 x 305 x 211mm
Weight	2.0kg
Warranty	2 Years
Electrical	230V AC, 50Hz, 0.2A

EB1020 MiniMixer™ 3D shaker, 268 x 191mm AUD428.00 stock?
EB1320 BioMixer™ 3D shaker, 300 x 300mm AUD472.00 stock?

R2 ROTARY MIXER
Low speed mixer for EM preparations.
The slow rotational speed of the R2 lends itself to EM tissue processing techniques. Slow rotation is recommended for processing specimens and leads to more complete infiltration without air mixing, giving improved results for tissue preparations.
The R2 has rubber cushioned feet on the bottom as well as on the back so it may be placed on either of two angles, 35° from horizontal when placed on the "bottom feet" and 55° from horizontal when placed on the "back feet".
A high torque motor maintains constant speed at full load. Variable speed is easily set with a rotary control. Rotational speed is 0.5 - 7.5 RPM. The R2 has been tested under heavy load conditions to assure reliability.
A black-anodised head (E1051) with 18 holes for bottles or vials up to 30mm in diameter comes with the R2. A head with 31 x 16.3mm holes is also available (E1054).

Dimensions:
Head - 19.7cm O.D., 18 holes (32mm ø)
Body - 18.6cm W, 16.5cm H, 20.3cm D
With E1051 head mounted the R2 occupies the following dimensions:
19.7cm W, 19.5cm H, 20.3cm D
Weight with E1051 head: 2.4kg

Technical Note

E1053 R2 Rotary mixer AUD680.00 stock?
E1054 Rotator head, 31 holes (16.3mm ø) AUD166.00 stock?

VORTEX MIXER

FEATURES
Vormix is a Touch/Go or constant running variable speed vortex mixer with touch plate. Electronic speed control gives constant speed and good torque at all levels. Two-position switch with built-in pilot light for continuous, or touch start running. Suction-type rubber feet give stability and quiet operation.

The rubber cup's internal diameter is 27mm. This cup is easily exchanged with an optional holder, which has a firm foam top with a 45mm diameter surface. This larger surface may be used to vortex a larger vessel, or many small vials at once. Another option is a microtube adaptor, which is shown further down on this page.

DESIGN
The unit is mounted on a cast aluminium base with a strong metal case coated with an attractive bright enamel which is easy to clean and resistant to chemicals. The skirted rubber cup protects components within the case from accidental spillage. Components are readily available and easy to replace if necessary.

Also available with wrist operated touch plate.

TECHNICAL DATA

Overall Dimensions	150mm H x 120mm W x 180mm L
Electrical Requirements	220-240 V 50 Hz
Speed Range	500-2800 rpm
Weight	2.4kg
Catalogue No.	EVM80
Packed weight for (overseas) shipping	3.5kg

EVM80 Vortex mixer AUD455.00 stock?
EVM80AP Sponge adapter plate for Vortex mixer AUD72.00 stock?

MAGNETIC STIRRER HOTPLATE

FEATURES
Heavy gauge mild steel body finished with polyester powder coating for durability. Solid aluminium hotplate combined with kaowool glassfibre insulation give rapid heatup, good temperature control, and minimal temperature variation or fluctuation. Stainless steel baffle and air space maintains body at a safe handling temperature.

The element is an incalloy type for easy replacement. Heating is controlled by a simmerstat with 0-10 knob for easy setting. Temperature range is from 50°C to 300°C. Temperature will drop slightly with stirrer on, and is dependent on load.

Available in two sizes:
EMSH200: 200 x 200mm
EMSH300: 300 x 300mm

Choice of heavy duty/low speed stirrer (approximately 800 rpm) or light duty/high speed stirrer (approximately 2000 rpm). Maximum speed is dependent on follower size, fluid viscosity and volume.

SPECIFICATIONS
EMSH200: 1000 W, 240 V, 50 Hz, 2000 rpm
EMSH300: 1800 W, 240 V, 50 Hz, 800 rpm

OPTIONS
Teflon Coated Hotplate
Thermostat Control
Light Duty/High Speed Stirrer (standard on EMSH200)
Heavy Duty/Low Speed Stirrer (standard on EMSH300)

EXTERNAL PROBE
These stirrer hotplates are also available with external probe. Heating is controlled by a digital PID controller with external sensor probe for accurate control of liquid temperature. Temperature range is from ambient to 300°C. Stirring action is not affected by the probe as it is only 1.5mm in diameter. An overtemp cutout restricts the maximum surface temperature of the hotplate to approx. 350°C. This will protect the unit from overheating in the event of the sensor not being positioned correctly.
Digital PID with an external probe is the most accurate means of measuring and controlling temperatures on a hotplate to better than 1 degree C. It is also most expensive. IR Thermometers (page E3) are an effective alternative. They are only a slightly less accurate means to determine uniformity and precise temperature on a hotplate. Adjustments can then be made using the standard high quality thermostat control.

EMSH200 Magnetic stirrer hotplate, 200 x 200mm AUD649.00 stock?
EMSH200T Magnetic stirrer hotplate 200 x 200mm PTFE AUD708.00 stock?
EMSH300 Magnetic stirrer hotplate 300 x 300mm AUD783.00 stock?
EMSH300T Magnetic stirrer hotplate 300 x 300mm PTFE AUD803.00 stock?

MAGNETIC STIRRER AND HOTPLATE
Compact design featuring continously variable speed control with speed to approximately 2000 rpm, with an adequately powered motor and strong Alnico bar magnet. Choice of energy regulator or thermostat control (optional). Hotplate diameter approximately 125mm, aluminium for good conductivity, PTFE coated (optional), supplied complete with stainless steel retort rod. The unit is of mild steel body and finished with a bright polyester powder coating for durability.

Overall Dimensions HxWxD	140mm x 150mm x 240mm
Mass	3kg
Maximum Temperature	350°C
Catalogue No.	EMSH90

EMSH90 Magnetic stirrer hotplate, 140 x 150 x 240mm AUD530.00 stock?
EMSH90T Magnetic stirrer hotplate 140 x 150 x 240mm PTFE AUD545.00 stock?

MULTI POSITION MAGNETIC STIRRER HOTPLATE

FEATURES
Available as two position up to six position units, these hotplate stirrers feature individually controlled stirring and heating positions that let you perform different applications simultaneously. You can use units to stir only, heat only, or heat and stir at the same time. Strong Alnico bar magnets driven by ball bearing shaded pole motors provide reliable stirring action up to 2000 rpm. Speed control and heating dials have ten divisions for easy setting, and reproducibility.

The aluminium hotplate of 130mm diameter provides rapid heat up without fear of cracking due to thermal shock. Temperature control from around 70°C to 350°C is via energy regulator or thermostat control (optional). PTFE coated hotplates for chemical resistance are optional. The chassis of heavy gauge mild steel is finished in wedgewood blue polyester powder coating. Yellow, white or APO grey available on request.

Each hotplate has a built in rod support and removable 28cm stainless steel rod (8mm diameter). Support racks can be made to customer requirements if preferred.

SPECIFICATIONS

Aluminium Hotplate Diameter	130mm
Speed Range	100 to 2000rpm
Temperature Range	70-350°C
Overall Dimensions	140mm H x 250mm D x 150mm x No. of positions W
Rating	240v, 50hz, 400w x number of positions
Catalogue No.	EMSH90-2 (or number of positions)

EMSH90-2  Magnetic stirrer hotplate, 2 positions
EMSH90-3  Magnetic stirrer hotplate, 3 positions
EMSH90-4  Magnetic stirrer hotplate, 4 positions
EMSH90-5  Magnetic stirrer hotplate, 5 positions
EMSH90-6  Magnetic stirrer hotplate, 6 positions

EMSH90-6 Magnetic stirrer hotplate, 6 positions ask stock?

MAGNETIC STIRRER
Low cost, but stainless steel construction, aluminium cover, variable speed control to 2000 RPM, with SS retort rod. Dimensions in mm: 90H x 130W x 150mm D. Weight 1.5kg.
240V, 50hz

EMS4 Magnetic stirrer, 90 x 130 x 150mm AUD264.00 stock?

HEAVY DUTY MAGNETIC STIRRER
Heavy gauge mild steel chassis and heavy gauge aluminium cover. Powder coated in white polyester. Solid state device gives smooth, variable speed control to approximately 1500 RPM.
Two super-strong neodymium iron boron magnets driven by 25mm stack motor ensures effective stirring action in high viscosity fluids.
Required mains voltage: 240V 50hz.
Dimensions:
EMS5 - 125H x 200W x 200Dmm
EMS6 - 125H x 250W x 250Dmm
EMS7 - 125H x 300W x 300Dmm

	EMS5	EMS6	EMS7
Overall Dimensions	105mmH x 200mmW x 200mmD	125mmH x 250mmW x 250mmD	125mmH x 300mmW x 300mmD
Mass	2.5kg	3kg	3.5kg
Recommended Follower Size	30-50mm	50-70mm	60-80mm
Recommended Stir Volume	500mL to 5000mL	1L to 10L	2L to 20L

EMS5 Heavy duty magnetic stirrer, 105 x 200 x 200mm AUD368.00 stock?
EMS6 Magnetic stirrer 125 x 250 x 250mm AUD413.00 stock?
EMS7 Magnetic stirrer 125 x 300 x 300mm AUD481.00 stock?

LABORATORY FLOCCULATOR/ JAR TESTER
The 3G Platypus laboratory flocculator/ jar tester facilitates pilot scale evaluation of optimum physical/ chemical treatment for surface water, ground water and waste water treatment processes. Lightweight, digitally controlled and easy to operate.
Designed and manufactured in Australia.Jartester, flocculator
Options available for international supply.

Features

• Lightweight, durable body.
  Easy to clean, water resistant, extensive use of corrosion resistant ABS, polycarbonate and acrylic materials.
  
  
• Program setting for flash mixing, flocculation speed and time
  Four independent stations/drives each with independently programmed sequential speed and time settings for flash mixing and flocculation stages.
  Individual station Automatic, Manual, Program, Idle and Test mode selections.
  Retention of LAST, RPM and TIME settings (in AUTO) for ongoing tests.
  PWM motor speed controllers tied-back to actual speed (measured by Hall Effect speed sensors).
  Each station’s speed microprocessor controls paddle speed in accordance with the programmed set speed (setpoint).
  Speed controllers ensure drive output speeds are controlled to set speed rather than inferred speed.
  Paddle speed is relatively unaffected by variable test water viscosity, temperature conditions or jar size.
  RS-232 connectivity provision for debug and in-circuit programming.
  Fault diagnostics, LED and digital display messages.
  
  
• Tactile membrane keypads
  State-of-the-art water resistant, tactile keypads at each station incorporating programming touch buttons, control mode and stage selection indicators (LEDs).
  
  
• Digital displays
  14mm 3 and 4 digit numeric LED displays - RPM and time.
  Each speed and time display is common for stage 1 and stage 2 – selectable.
  4 digit display provides a clock for stage time – selectable for flash mix and flocculation.
  
  
• Quiet operation
  Motor/gearboxes equipped with rubber power transmission type belts resulting in vibration free operation and low noise.
  
  
• Backlighting
  Extra low voltage, 2.4 Watt (total) LED lighting array.
  Brilliant ice white light uniformly distributed across the bottom rear of the unit.
  Suspended floc particles illuminated against a black backdrop maximises floc definition and contrast - facilitates accurate observation of floc size, floc density, floc settling rates and supernatant/ subnatant clarity.
  The unique position of, and low heat generated by the light source avoids thermal eddies that may interfere with floc settlement rate assessment.
  
  
• Square jars (4 jars of your choice included)
  1 Litre and 2 litre clear polycarbonate injection moulded jars.
  Easy-to-clean fillets at the floor and wall corner interfaces.
  Anti-slip top lips for secure handling in wet environments.
  Square jar emulation of full scale plant flocculator geometry.
  Dimensions:
  1L - base 93.2mm, height 146.7mm, rim 111.4mm
  2L - base 112.3mm, height 183.6mm, rim 139.7mm
  
  
• Unique paddles (2 small and 2 big paddles included)
  Radial flow clear polycarbonate paddles have uniquely tilted blades to induce a component of axial flow - ensures homogeneous suspension of fast settling flocs.
  Clip-on/clip-off easy clean paddle sets to suit 1L and 2L jars.
  
  

SpecificationsJartester, flocculator
EMC Compliance:
AS/NZS CISPR 11 (C-tick) EN 61326:2002 (emissions + immunity) to 61000 series including;
EN 61000-4-2 (ESD)
EN 61000-4-3 (Radiated field)
EN 61000-4-4 (EFT/Burst)
EN 61000-4-5 (Surge)
EN 61000-4-6 (Conducted RF)
EN 61000-4-8 (Magnetic field)
EN 61000-4-11 (Voltage dips)
EN 61000-3-2 (Harmonics)
EN 61000-3-3 (Flicker)
FCC Part 15 Class A

Powerpack:
15VDC/4.40Amp External Power Supply
UL/CE/C-tick
EN 60950 (safety)
EN 55022 Class B (EMC)
EN 61000-series (EMC) – relevant as above
ENV 502040
UL 1950 (safety)

Housing: Injection moulded computer grey ABS

Chassis: Zinc coated steel sheet, powder-coated matt black (top & bottom chassis)

Paddle shafts: Stainless steel

Paddles: Clip-on injection moulded clear polycarbonate with inclined paddle face (small and large sizes for 1 litre and 2 litre jars respectively)

Drive motors: 12VDC geared motors, low noise

Transmission: 3M/6 low noise power transmission drive belts

Pulleys: Injection moulded acetal

Bearings: Shielded deep groove ball bearings

Keypad: Polyester membrane tactile keypad, control mode and stage indicating LEDs

LED displays:
14mm 4 digit amber alpha/numeric clock display
14mm 3 digit green alpha/numeric RPM display

Speed control: PWM with Hall Effect sensor tieback

Illumination: Diffused, low heat 2.4W 5500K LED array

Accessories
1Litre injection moulded clear polycarbonate square jars
2Litre injection moulded clear polycarbonate square jars
Water resistant heavy duty PVC dust cover
Replacement injection moulded clear polycarbonate paddles
Replacement powerpack

Packed dimensions: 740 x 470 x 250mm
Packed weight: 16.60kg
Warranty: 12 months on parts and labour

EMF4 3G Platypus flocculator/ jar tester, 4 jars ask stock?
EMF4-J1 Jar for 3G Platypus, PC, 1L (includes paddle) AUD86.00 stock?
EMF4-J2 Jar for 3G Platypus, PC, 2L (includes paddle) AUD98.00 stock?