Shipping of Ovens, Incubators and Hot Plates: Our quotes include shipping cost of these items within Australia. Quotations for these items to locations beyond Australia do not include shipping. To assist you in obtaining quotations for freight we have linked the shipping dimensions and weights of incubators, ovens, hot plates, waterbaths and steambaths.
HOT PLATES
Our hotplates are suitable for all routine laboratory applications. They are rugged and durable and are available in a range of sizes and types designed for temperature uniformly over the whole top surface. The bodies are of mild steel, coated with white enamel or of stainless steel supported with rubber feet.
Cast iron top units are controlled with energy regulators, maximum 500°C. Aluminium top units are thermostatically controlled up to 300°C - Teflon "Silverstone" coated 280°C. Solid state instruments can be fitted for finer temperature control. Stainless steel surrounds can be supplied for sand bath heating.
A separate controller is supplied for the larger model 206 cast iron top hotplate or for any other model when used in extremely corrosive environments. Special acid resistant element leads and 316 stainless steel is used on the heavy acid range of hotplates.
SEM heat controller can be used on any heating apparatus.
- HC1 to 10 amps at 240V.
- HC15 TO 15 amps at 240V.
We supply a large range of hotplates - from 130mm diameter to 610 x 500mm rectangular. All require 220/240 volts. They are durable and well designed for laboratory applications. The bodies are of mild steel coated with a white, high acid-resistant polyurethane enamel.
Hotplate tops are made from smooth or rough aluminium, optionally with PTFE coating or in cast iron. A smooth hotplate is preferable for curing mounting media, smoothing wax and resin sections, heat staining and drying silica gel; a rough one reduces boiling bounce.
Hotplates are custom built and special purpose models for instance in explosion prone environments or for drying are available Some models are available for use in extremely corrosive environments. These are fitted with the temperature controller in a separate housing and a more acid-resistant element. For critical analytical work hotplates can be supplied completely coated PTFE
These are quality Australian made hot plates. Usual delivery period is four weeks, although small hotplates may be ex-stock. Indicated prices are for Australia and New Zealand; to other destinations and for larger hotplates, please inquire.
All Aluminium/ Teflon hotplates are available in a low-temperature version. These are better controlled in the lower temperature range and cannot reach the highest temperatures, thus avoiding some hazardous situations. These plates carry the suffix 'L' in addition to the A or T in the catalogue number e.g. E204AL. They may be ordered specifying the critical temperature range, prices are the same as the equivalent normal temperature range hotplates.
Variations available using E202 as an example:
E202 - cast iron
E202A - aluminium
E202T - PTFE coated aluminium
E202AL - aluminium, low temperature
ROUND HOT PLATES
PTFE HOTPLATE
CAST IRON HOTPLATE
| Model | Size mm | Top plate | Approx. Max. Temp. | Power rating | Phase | Control | Price |
| E202 | 200mm Ø | Cast iron | 480oC | 1200W | 1 | Energy Reg | AUD248.00
stock?
 |
| E203A | 130mm Ø | Aluminium | 300oC | 400W | 1 | Energy reg | AUD209.00
stock?
|
| E203T | 130mm Ø | Aluminium/PTFE | 280oC | 400W | 1 | Thermostat | AUD265.00
stock?
|
| Model | Size mm | Top plate | Approx. Max. Temp. | Power rating | Phase | Control | Price |
| E204 | 230 x 230 | Cast Iron | 400oC | 1200W | 1 | Energy Reg | AUD291.00
stock?
|
| E204A | 230 x 230 | Aluminium | 300oC | 750W | 1 | Thermostat | AUD315.00
stock?
|
| E204T | 230 x 230 | Aluminium/PTFE | 280oC | 750W | 1 | Thermostat | AUD375.00
stock?
|
| E201 | 460 x 260 | Cast Iron | 375oC | 2400W | 1 | Energy Reg | AUD460.00
stock?
|
| E201A | 460 x 260 | Aluminium | 300oC | 1500W | 1 | Thermostat | AUD498.00
stock?
|
| E201T | 460 x 260 | Aluminium/PTFE | 280oC | 1500W | 1 | Thermostat | AUD580.00
stock?
|
| E207 | 610 x 300 | Cast Iron | 385oC | 3600W | 1 | Energy Reg | AUD717.00
stock?
|
| E207A | 610 x 300 | Aluminium | 300oC | 2400W | 1 | Thermostat | AUD764.00
stock?
|
| E207T | 610 x 300 | Aluminium/ PTFE | 280oC | 2400W | 1 | Thermostat | AUD832.00
stock?
|
| E206 | 610 x 500 | Cast Iron | 450oC | 7200W | 3 | Energy Reg | AUD1,498.00
stock?
|
| E206A | 610 x 500 | Aluminium | 300oC | 4500W | 3 | Thermostat | AUD1,399.00 /ea
stock?
|
| E206T | 610 x 500 | Aluminium/ PTFE | 280oC | 4500W | 3 | Thermostat | AUD1,447.00
stock?
|
| E208 | 200 x 200 | Cast Iron | 450oC | 1200W | 1 | Energy Reg | AUD265.00
stock?
|
| E208A | 200 x 200 | Aluminium | 300oC | 1200W | 1 | Thermostat | AUD313.00
stock?
|
| E208T | 200 x 200 | Aluminium/ PTFE | 280oC | 1200W | 1 | Thermostat | AUD338.00
stock?
|
| E209 | 300 x 300 | Cast Iron | 400oC | 2400W | 1 | Energy Reg | AUD371.00
stock?
|
| E209A | 300 x 300 | Aluminium | 300oC | 1200W | 1 | Thermostat | AUD404.00
stock?
|
| E209T | 300 x 300 | Aluminium/ PTFE | 280oC | 1200W | 1 | Thermostat | AUD467.00
stock?
|
| E210 | 460 x 300 | Cast Iron | 350oC | 2400W | 1 | Energy Reg | AUD512.00
stock?
|
| E210A | 460 x 300 | Aluminium | 300oC | 1500W | 1 | Thermostat | AUD530.00
stock?
|
| E210T | 460 x 300 | Aluminium/ PTFE | 280oC | 1500W | 1 | Thermostat | AUD597.00
stock?
|
These Heavy Acid Range Hotplates are suitable for extremely corrosive environments. This range of hotplates covers a variety of sizes in cast iron and aluminium on request.
The hotplate bodies are constructed entirely from heavy gauge 316 stainless steel and element connections are fully sealed.
Single phase hotplates are supplied with a 10 amp or 15 amp heat control box of cast aluminium construction. This can be free standing on rubber supports or fixed to a wall via mounting lugs.
Three phase hotplates are supplied with a robust switching unit housed in a powder coated heavy gauge steel box and a single phase cord to power the energy regulator and three pole relay.
Teflon coated aluminium or austenitic iron hotplates are available in most sizes and digital PID control with removable temperature probe is an option on any hotplate.
*Specials made to customers requirements.
HEAVY ACID RANGE HOTPLATES
| Model No. |
Size (mm) |
Top Plate |
Approximate Max Temp. |
Power Rating | Phase | Controller | Price |
| E202HA | 200mm Ø | Cast Iron | 480°C | 1200W | 1 | HC1 | AUD393.00
stock?
|
| E204HA | 230 x 230 | Cast Iron | 400°C | 1200W | 1 | HC1 | AUD433.00
stock?
|
| E201HA | 460 x 260 | Cast Iron | 375°C | 2400W | 1 | HC1 | AUD619.00
stock?
|
| E207HA | 610 x 300 | Cast Iron | 385°C | 3600W | 1 | HC15 | AUD884.00
stock?
|
| E206HA | 610 x 500 | Cast Iron | 450°C | 7200W | 3 | 206SWU | AUD1,649.00
stock?
|
| E208HA | 200 x 200 | Cast Iron | 450°C | 1200W | 1 | HC1 | AUD414.00
stock?
|
| E209HA | 300 x 300 | Cast Iron | 400°C | 2400W | 1 | HC1 | AUD531.00
stock?
|
| E210HA | 460 x 300 | Cast Iron | 350°C | 2400W | 1 | HC1 | AUD668.00
stock?
|
CONTROL UNITS
| Mode | Power Rating (Max). | Phase | Current (Max). |
| EHC1 | 2400W | 1 | 10 Amp |
| EHC15 | 3600W | 1 | 15 Amp |
| E206SWU | 3 x 2400W | 3 | 3 x 10 Amp |
SAND BATHS
All rectangular and square S.E.M. hotplates can be converted to sand baths by the addition of a Sand Bath Surround. These are made from 316 grade stainless steel and simply slide on to the hotplate. Clamping screws secure the surround and eliminate any gaps for sand to escape.
Wall heights are 30, 50 or 75mm.
Optional flat lids available for any size Sand Bath Surround. Ask for price.
WATER BATHS
These water baths are well constructed. The interior is made of super 304 stainless steel with all joints welded. A stainless steel rack covers the elements. A pyramid-type lid is also made in stainless steel. It is hinged at the back and has round bakelite knobs on each side for easy opening with minimal risk of steam burning.
The outer case is constructed of zinc seal coated steel, finished in light-cream coloured, tough polyurethane enamel. The bath has insulated walls.
The temperature is controlled by a snap action thermostat up to 100oC and has a push button reset for overheat protection. All controls are mounted on the right hand side.
Circulating Water Baths: These water baths are static, but can be turned into circulating water baths through the addition of a suitable pump. This gives better convection within the water bath and can be used to circulate controlled hot water in another vessel. Ask for a price. Pumps used below 40°C are cheaper than more heat tolerant pumps - specify. Digital PID temperature controllers (rather than thermostats) and programmable PID are other available options.
The water baths can be supplied with a gable lid or with a simple slide lid as required.
SPECIFICATIONS
Please inquire for prices on water baths
Variations available using EWB3 as an example:
EWB3 - no lid, thermostat temperature control
EWB3F - flat lid, thermostat
EWB3G - gable lid, thermostat
EWB3D - no lid, digital PID temperature control
EWB3FD - flat lid, digital PID
EWB3GD - gable lid, digital PID
EWB3 Water bath, 255 x 255 x 220mm
EWB5 Water bath, 380 x 255 x 220mm
EWB7 Water bath, 500 x 255 x 220mm
EWB3F Water bath, 255 x 255 x 220, flat lid AUD1,175.00 stock?
These water baths are well constructed. The interior is made of super 304 stainless steel with all joints welded. A stainless steel rack covers the elements. A pyramid-type lid is also made in stainless steel. It is hinged at the back and has round bakelite knobs on each side for easy opening with minimal risk of steam burning.
The outer case is constructed of zinc seal coated steel, finished in light-cream coloured, tough polyurethane enamel. The bath has insulated walls.
The temperature is controlled by a snap action thermostat up to 100oC and has a push button reset for overheat protection. All controls are mounted on the right hand side.
Circulating Water Baths: These water baths are static, but can be turned into circulating water baths through the addition of a suitable pump. This gives better convection within the water bath and can be used to circulate controlled hot water in another vessel. Ask for a price. Pumps used below 40°C are cheaper than more heat tolerant pumps - specify. Digital PID temperature controllers (rather than thermostats) and programmable PID are other available options.
The water baths can be supplied with a gable lid or with a simple slide lid as required.
SPECIFICATIONS
| Model | Internal Dimensions LxWxD mm | Capacity Litres | Rating 240V 50Hz |
| EWB3 | 255 x 255 x 220 | 15 | 1000 W |
| EWB5 | 380 x 255 x 220 | 21 | 1000 W |
| EWB7 | 500 x 255 x 220 | 28 | 1500 W |
Variations available using EWB3 as an example:
EWB3 - no lid, thermostat temperature control
EWB3F - flat lid, thermostat
EWB3G - gable lid, thermostat
EWB3D - no lid, digital PID temperature control
EWB3FD - flat lid, digital PID
EWB3GD - gable lid, digital PID
EWB3 Water bath, 255 x 255 x 220mm
EWB5 Water bath, 380 x 255 x 220mm
EWB7 Water bath, 500 x 255 x 220mm
EWB3F Water bath, 255 x 255 x 220, flat lid AUD1,175.00 stock?
EWB7F
STEAM BATHS
All stainless steel construction with welded joints. Fitted with constant water level device. Internal depth 90mm. The heating element has an overheat protection device within it.
A removable stainless steel cover has the appropriate number and size of holes, each fitted with a set of four rings.
The unit has a simmerstat to regulate heating, a two metre flex and three pin plug top.
INLINE STEAM BATHS
Inline steam baths are available in the following sizes:
*Catalogue number explanation: SB6-8 = Steam bath with 6 holes, 8cm each.
ESB6-10 Steam bath, 430 x 295 x 185mm, 6 x 100mm holes
ESB12-8 Steam bath, 420 x 320 x 185mm, 12 x 80mm holes
ESB12-10 Steam bath, 540 x 430 x 185mm, 12 x 100mm holes
ESB2-8 Steam bath, 250 x 160 x 185mm, 2 x 80mm holes
ESB2-10 Steam bath, 295 x 160 x 185mm, 2 x 100mm holes
ESB6-8IL Inline steam bath, 829 x 162 x 185mm, 6 x 80mm holes
ESB4-8IL Inline steam bath, 563 x 162 x 185mm, 4 x 80mm holes
ESB6-10IL Inline steam bath, 829 x 162 x 185mm, 6 x 100mm holes
ESB4-10IL Inline steam bath, 563 x 162 x 185mm, 4 x 100mm holes
ESB6-8 Steam bath, 334 x 220 x 185mm, 6 x 80mm holes AUD906.00 stock?
All stainless steel construction with welded joints. Fitted with constant water level device. Internal depth 90mm. The heating element has an overheat protection device within it.
A removable stainless steel cover has the appropriate number and size of holes, each fitted with a set of four rings.
The unit has a simmerstat to regulate heating, a two metre flex and three pin plug top.
| Cat. Number* | Overall Dimensions | W | Hole Size |
| 334L x 220W x 185H | 1500 | 80mm | |
| 430L x 295W x 185H | 1500 | 100mm | |
| 420L x 320W x 185H | 2400 | 80mm | |
| 540L x 430W x 185H | 2400 | 100mm | |
| 250L x 160W x 185H | 1500 | 80mm | |
| 295L x 160W x 185H | 1500 | 100mm |
INLINE STEAM BATHS
Inline steam baths are available in the following sizes:
| 829L x 162W x 185H | 1500 | 80mm | |
| 563L x 162W x 185H | 1500 | 80mm | |
| 829L x 162W x 185H | 1500 | 100mm | |
| 563L x 162W x 185H | 1500 | 100mm |
*Catalogue number explanation: SB6-8 = Steam bath with 6 holes, 8cm each.
Please inquire for prices on steam baths
ESB6-10 Steam bath, 430 x 295 x 185mm, 6 x 100mm holes
ESB12-8 Steam bath, 420 x 320 x 185mm, 12 x 80mm holes
ESB12-10 Steam bath, 540 x 430 x 185mm, 12 x 100mm holes
ESB2-8 Steam bath, 250 x 160 x 185mm, 2 x 80mm holes
ESB2-10 Steam bath, 295 x 160 x 185mm, 2 x 100mm holes
ESB6-8IL Inline steam bath, 829 x 162 x 185mm, 6 x 80mm holes
ESB4-8IL Inline steam bath, 563 x 162 x 185mm, 4 x 80mm holes
ESB6-10IL Inline steam bath, 829 x 162 x 185mm, 6 x 100mm holes
ESB4-10IL Inline steam bath, 563 x 162 x 185mm, 4 x 100mm holes
ESB6-8 Steam bath, 334 x 220 x 185mm, 6 x 80mm holes AUD906.00 stock?
ESB6
ESB6IL
DRY BATHS, DIGITAL
The Benchmark dry baths feature digital control of temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks (96 x 1.5/2.0mL microtubes).
Features
*Temperature range of four position dry bath is Amb. +5 to 130ºC
EB1001 Digital dry bath, 1 block AUD542.00 stock?
EB1002 Digital dry bath, 2 blocks AUD582.00 stock?
EB1004 Digital dry bath, 4 blocks AUD805.00 stock?
EB1004-B1 Dry bath block for 24 x 0.5mL centrifuge tubes AUD152.00 stock?
EB1004-B2 Dry bath block for 24 x 1.5/2.0mL centrifuge tubes AUD152.00 stock?
EB1004-B3 Dry bath block for 12 x 15mL centrifuge tubes AUD152.00 stock?
EB1004-B4 Dry bath block for 5 x 50mL centrifuge tubes AUD152.00 stock?
EB1004-B5 Dry bath block for 20 x 10mm test tubes or 20 x 2.0mL tubes AUD152.00 stock?
EB1004-B6 Dry bath block for 20 x 13mm test tubes or 20 x 5/7mL tubes AUD152.00 stock?
EB1004-B7 Dry bath block for 12 x 15/16mm test tubes or 12 x 10mL tubes AUD152.00 stock?
The Benchmark dry baths feature digital control of temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks (96 x 1.5/2.0mL microtubes).
Features
- Digital accuracy and convenience
- Built-in user recalibration function to guarantee long term temperature accuracy
- Single, double and four block capacity
- High grade aluminium blocks for a wide variety of tube sizes
- Block cavities are precision machined to match the conical size and shape of the tubes
- Blocks available for 0.5, 1.5, 2.0, 15 and 50mL tubes
- Block lifter with insulated handle for quick exchange of hot blocks
| Specifications | |
| Temperature range | Amb. +5 to 150ºC |
| Temperature resolution | 0.1ºC |
| Temperature accuracy | +/-0.2º |
| Temperature increments | 0.1ºC |
| Temperature uniformity | +/-0.2ºC |
| Timer | 1 to 999 minutes |
| Dimensions (WxDxH) | |
| Single position | 200 x 230 x 80mm |
| Two position | 220 x 270 x 80mm |
| Four position | 220 x 355 x 80mm |
| Block dimensions (WxDxH) | 76 x 95 x 50 or 83mm |
| Chamber | Stainless steel |
| Operating temperature range | +4ºC to +65ºC |
| Warranty | 2 Years |
| Electrical | 230V AC, 50Hz |
EB1001 Digital dry bath, 1 block AUD542.00 stock?
EB1002 Digital dry bath, 2 blocks AUD582.00 stock?
EB1004 Digital dry bath, 4 blocks AUD805.00 stock?
EB1004-B1 Dry bath block for 24 x 0.5mL centrifuge tubes AUD152.00 stock?
EB1004-B2 Dry bath block for 24 x 1.5/2.0mL centrifuge tubes AUD152.00 stock?
EB1004-B3 Dry bath block for 12 x 15mL centrifuge tubes AUD152.00 stock?
EB1004-B4 Dry bath block for 5 x 50mL centrifuge tubes AUD152.00 stock?
EB1004-B5 Dry bath block for 20 x 10mm test tubes or 20 x 2.0mL tubes AUD152.00 stock?
EB1004-B6 Dry bath block for 20 x 13mm test tubes or 20 x 5/7mL tubes AUD152.00 stock?
EB1004-B7 Dry bath block for 12 x 15/16mm test tubes or 12 x 10mL tubes AUD152.00 stock?
[click to enlarge]
Dry baths, 1, 2 and 4 blocks
Blocks for dry baths
MyBlock™ MINI DRY BATH
MyBlock™ Mini dry bath is a compact instrument which fits almost anywhere and can also be used in cars, boats or wherever a 12 volt power source is available.
Six block configurations cater for a variety of tube sizes, ranging from 0.2 to 50mL. EB100-B4 holes have been shaped to the profile of a standard 1.5mL conical centrifuge tube. The others have straight sides. A convenient block lifter is also included, allowing blocks to be removed from the instrument before they have cooled.
The simple touch pad control with large, backlit, digital display is designed for 'set and walk away' temperature selection, ambient + 5°C to 80°C. Each unit includes a clear plastic cover, providing enhanced temperature uniformity and ramping time.
Features
EB100 MyBlock™ Mini dry bath AUD277.00 stock?
EB100-B1 Mini dry bath block for 40 x 0.2mL tubes or 5 PCR strips AUD115.00 stock?
EB100-B2 Mini dry bath block for 24 x 0.5mL centrifuge tubes AUD111.00 stock?
EB100-B3 Mini dry bath block for 15 x 1.5mL centrifuge tubes AUD111.00 stock?
EB100-B4 Mini dry bath block for 15 x 1.5/2.0mL centrifuge tubes (tapered) AUD111.00 stock?
EB100-B5 Mini dry bath block for 4 x 15mL centrifuge tubes AUD136.00 stock?
EB100-B6 Mini dry bath block for 2 x 50mL centrifuge tubes AUD136.00 stock?
EB100-PA12 Power adapter for vehicles, 12V AUD63.00 stock?
MyBlock™ Mini dry bath is a compact instrument which fits almost anywhere and can also be used in cars, boats or wherever a 12 volt power source is available.
Six block configurations cater for a variety of tube sizes, ranging from 0.2 to 50mL. EB100-B4 holes have been shaped to the profile of a standard 1.5mL conical centrifuge tube. The others have straight sides. A convenient block lifter is also included, allowing blocks to be removed from the instrument before they have cooled.
The simple touch pad control with large, backlit, digital display is designed for 'set and walk away' temperature selection, ambient + 5°C to 80°C. Each unit includes a clear plastic cover, providing enhanced temperature uniformity and ramping time.
Features
- Compact, fits in the palm of a hand
- Exchangeable blocks, for tube sizes 0.2 to 50ml
- Clear cover ensures temperature uniformity
- Digital temperature control
- High accuracy
- Portable (optional 12V car adapter)
| Specifications | |
| Temperature range | Ambient +5 to 80°C |
| Temperature accuracy | +/- 0.5°C |
| Temperature increments | 0.1°C |
| Temperature uniformity | +/- 0.2°C |
| Block construction | High grade aluminium |
| Dimensions | 11.2 x 15 x 10 cm |
| Weight | 1.2 lbs / 3kg |
| Electrical | 100 to 240V 50-60 Hz |
EB100 MyBlock™ Mini dry bath AUD277.00 stock?
EB100-B1 Mini dry bath block for 40 x 0.2mL tubes or 5 PCR strips AUD115.00 stock?
EB100-B2 Mini dry bath block for 24 x 0.5mL centrifuge tubes AUD111.00 stock?
EB100-B3 Mini dry bath block for 15 x 1.5mL centrifuge tubes AUD111.00 stock?
EB100-B4 Mini dry bath block for 15 x 1.5/2.0mL centrifuge tubes (tapered) AUD111.00 stock?
EB100-B5 Mini dry bath block for 4 x 15mL centrifuge tubes AUD136.00 stock?
EB100-B6 Mini dry bath block for 2 x 50mL centrifuge tubes AUD136.00 stock?
EB100-PA12 Power adapter for vehicles, 12V AUD63.00 stock?
Mini dry bath
[click to enlarge]
Blocks (cover does not fit the 2 tall blocks)
MACRO KJELDAHL HEATERS
Constructed of stainless steel and supplied with 1-6 recesses, each fitted with a metal clad element specially designed for efficient heating and minimum effect from liquid spillage. Each element is controlled by an energy regulator and heating is indicated by a pilot light.
Two refractory support rings are supplied for each recess to accept from 100-800mL capacity flasks. They come in 4 sizes with the following internal diameters:
Extra small 50mm
Small 60mm
Large 80mm
K type 85mm
All multiple units include an adjustable stainless steel flask support. Without glassware. For use on 240V 50Hz.
MICRO KJELDAHL HEATERS
These units are specially designed with incoloy metal clad element set in an aluminium block 65mm diameter machined to give most efficient heating for Kjeldahl flasks. They are controlled by an energy regulator and can operate at temperatures up to 400°C. The body is made of stainless steel. The aluminium block is removable and additional blocks can be made supplied to suit test tubes or flat bottom soxhlet extraction type flasks.
Accepts flasks up to 100mL.
Available with 1 or 6 recesses.
Measurements:
EMIK1 - 90mm H x 75mm W x 265mm D. Rating 240V 150W.
EMIK6 - 150mm H x 640mm W x 265mm D. Rating 240V 900W.
EMAK2 Macro Kjeldahl heater, 2 recesses
EMAK3 Macro Kjeldahl heater, 3 recesses
EMAK4 Macro Kjeldahl heater, 4 recesses
EMAK6 Macro Kjeldahl heater, 6 recesses
EMIK1 Micro Kjeldahl heater, 1 recess
EMIK6 Micro Kjeldahl heater, 6 recesses
EMAK1 Macro Kjeldahl heater, 1 recess AUD328.00 stock?
Constructed of stainless steel and supplied with 1-6 recesses, each fitted with a metal clad element specially designed for efficient heating and minimum effect from liquid spillage. Each element is controlled by an energy regulator and heating is indicated by a pilot light.
Two refractory support rings are supplied for each recess to accept from 100-800mL capacity flasks. They come in 4 sizes with the following internal diameters:
Extra small 50mm
Small 60mm
Large 80mm
K type 85mm
All multiple units include an adjustable stainless steel flask support. Without glassware. For use on 240V 50Hz.
| Cat No. | Recesses | Length | Rating |
|---|---|---|---|
| 1 | 150mm | 600W | |
| 2 | 305mm | 1200W | |
| 3 | 460mm | 1800W | |
| 4 | 610mm | 2400W | |
| 6 | 915mm | 3600W |
These units are specially designed with incoloy metal clad element set in an aluminium block 65mm diameter machined to give most efficient heating for Kjeldahl flasks. They are controlled by an energy regulator and can operate at temperatures up to 400°C. The body is made of stainless steel. The aluminium block is removable and additional blocks can be made supplied to suit test tubes or flat bottom soxhlet extraction type flasks.
Accepts flasks up to 100mL.
Available with 1 or 6 recesses.
Measurements:
EMIK1 - 90mm H x 75mm W x 265mm D. Rating 240V 150W.
EMIK6 - 150mm H x 640mm W x 265mm D. Rating 240V 900W.
EMAK2 Macro Kjeldahl heater, 2 recesses
EMAK3 Macro Kjeldahl heater, 3 recesses
EMAK4 Macro Kjeldahl heater, 4 recesses
EMAK6 Macro Kjeldahl heater, 6 recesses
EMIK1 Micro Kjeldahl heater, 1 recess
EMIK6 Micro Kjeldahl heater, 6 recesses
EMAK1 Macro Kjeldahl heater, 1 recess AUD328.00 stock?
EMAK6
EMIK6
| 
|
