- Silica gel C820 on page C8
- Glassware drying cabinets on page E11
- EDCG Cabinet fitting for dry gas use is required to bleed any gas into desiccators, incubators or ovens.
GAS PRESSURE REGULATOR
Better than a needle valve for low, constant gas flow. Use on the low-pressure side of a standard or a two-stage gas regulator. Suitable for instruments which need a very low pressure and gas flow e.g. gas proportional counters, sputter coaters, ion beam thinners etc. A pressure gauge that fits into the regulator is available as a separate item. Its pressure range is 0-200kPa but lowest flow can only be gauged with a bubbler.
Regulator has 12.5mm (1/2") female gas fitting for in and out connection.
EM060 Mini gas pressure regulator AUD77.00 stock?
EM061 Pressure gauge, 200kPa AUD28.00 stock?
Better than a needle valve for low, constant gas flow. Use on the low-pressure side of a standard or a two-stage gas regulator. Suitable for instruments which need a very low pressure and gas flow e.g. gas proportional counters, sputter coaters, ion beam thinners etc. A pressure gauge that fits into the regulator is available as a separate item. Its pressure range is 0-200kPa but lowest flow can only be gauged with a bubbler.
Regulator has 12.5mm (1/2") female gas fitting for in and out connection.
EM060 Mini gas pressure regulator AUD77.00 stock?
EM061 Pressure gauge, 200kPa AUD28.00 stock?
EM060, EM061
DESICCATOR CABINETS
metal
These stackable cabinets are available in heavy gauge Zn Steel with a high-gloss, white powder coating on the inside and outside. The front of the cabinet has a large glass panel and the door seal is silicone rubber. All joints are well sealed. Two chrome plated wire trays are included. The medium size cabinet has three and the largest has four shelf positions. Additional shelves are available. Desiccators are supplied with a stainless steel tray for desiccant.
Alternatively, they are fabricated in stainless steel, which is left bare on the inside and coated with the white, high-gloss powder coating on the outside. Joints are metal sealed. The door frame is, however, made from mild steel and this is powder coated on both sides. The stainless version carries the catalogue number suffix SS.
The metal interior and shelves avoid electrical discharge problems. These units (except for the desiccant) do not present a contamination problem, so they are suitable for cleanroom use. For cleanroom use we recommend the version equipped for trickling industrial, dry nitrogen.
User note - Dry nitrogen operation
Prices include delivery within Australia and we can arrange for overseas shipping at lowest possible additional cost; please ask.
Dimensions and weights of cabinets packed for shipping (ex factory direct):
EDC1 - 550 x 530 x 500mm, 32kg
EDC2 - 600 x 600 x 600mm, 40kg
EDC3 - 670 x 670 x 730mm, 47kg
These metal cabinets are excellent quality and value. Larger cabinets may be custom made. Note: Hygrometers, including one with an alarm are featured on page E3 and more are on the Sper Scientific site, which is linked from page E14. Some of these instruments may be mounted on the inside against the glass panel to monitor humidity within a desiccator.
EDC1 Desiccator cabinet, 305 x 305 x 380mm AUD1,258.00 stock?
EDC1SS Desiccator cabinet, stainless steel, 305 x 305 x380mm AUD1,296.00 stock?
EDC2 Desiccator cabinet 400 x 400 x 400mm AUD1,350.00 stock?
EDC2SS Desiccator cabinet, stainless steel, 400 x 400 x 400mm AUD1,484.00 stock?
EDC3 Desiccator cabinet 550 x 530 x 500mm AUD1,349.00 stock?
EDC3SS Desiccator cabinet, stainless steel, 550 x 530 x 500mm AUD1,691.00 stock?
EDC4SS Desiccator cabinet, stainless steel, 600 x 400 x 400mm AUD1,733.00 stock?
EDC5SS Desiccator cabinet, stainless steel, 700 x 630 x 610mm ask stock?
EDCG EDC cabinet fitting for dry gas use AUD105.00 stock?
These stackable cabinets are available in heavy gauge Zn Steel with a high-gloss, white powder coating on the inside and outside. The front of the cabinet has a large glass panel and the door seal is silicone rubber. All joints are well sealed. Two chrome plated wire trays are included. The medium size cabinet has three and the largest has four shelf positions. Additional shelves are available. Desiccators are supplied with a stainless steel tray for desiccant.
Alternatively, they are fabricated in stainless steel, which is left bare on the inside and coated with the white, high-gloss powder coating on the outside. Joints are metal sealed. The door frame is, however, made from mild steel and this is powder coated on both sides. The stainless version carries the catalogue number suffix SS.
The metal interior and shelves avoid electrical discharge problems. These units (except for the desiccant) do not present a contamination problem, so they are suitable for cleanroom use. For cleanroom use we recommend the version equipped for trickling industrial, dry nitrogen.
User note - Dry nitrogen operation
Prices include delivery within Australia and we can arrange for overseas shipping at lowest possible additional cost; please ask.
Dimensions and weights of cabinets packed for shipping (ex factory direct):
EDC1 - 550 x 530 x 500mm, 32kg
EDC2 - 600 x 600 x 600mm, 40kg
EDC3 - 670 x 670 x 730mm, 47kg
These metal cabinets are excellent quality and value. Larger cabinets may be custom made. Note: Hygrometers, including one with an alarm are featured on page E3 and more are on the Sper Scientific site, which is linked from page E14. Some of these instruments may be mounted on the inside against the glass panel to monitor humidity within a desiccator.
| Catalogue No. | H (mm) | W (mm) | D (mm) | Shelf Positions | Shelves Supplied |
| EDC1 | 380 | 305 | 305 | 2 | 2 |
| EDC2 | 400 | 400 | 400 | 3 | 2 |
| EDC3 | 550 | 530 | 500 | 5 | 2 |
| EDC4 | 600 | 400 | 400 | 5 | 4 |
| EDC5 | 700 | 630 | 610 | 5 | 4 |
EDC1 Desiccator cabinet, 305 x 305 x 380mm AUD1,258.00 stock?
EDC1SS Desiccator cabinet, stainless steel, 305 x 305 x380mm AUD1,296.00 stock?
EDC2 Desiccator cabinet 400 x 400 x 400mm AUD1,350.00 stock?
EDC2SS Desiccator cabinet, stainless steel, 400 x 400 x 400mm AUD1,484.00 stock?
EDC3 Desiccator cabinet 550 x 530 x 500mm AUD1,349.00 stock?
EDC3SS Desiccator cabinet, stainless steel, 550 x 530 x 500mm AUD1,691.00 stock?
EDC4SS Desiccator cabinet, stainless steel, 600 x 400 x 400mm AUD1,733.00 stock?
EDC5SS Desiccator cabinet, stainless steel, 700 x 630 x 610mm ask stock?
EDCG EDC cabinet fitting for dry gas use AUD105.00 stock?
EDC1
VACUUM DESICCATORS PP/PC
Clear polycarbonate top. White polypropylene base provides excellent chemical resistance. Supplied with O-ring, PP perforated plate and stopcock with PTFE plug. Will hold a vacuum of 740mm Hg for 24 hours.
Dimensions:
E12-006 = ID 200mm, IH 175mm, EH 230mm, Vol. 4.35L
E12-007 = ID 250mm, IH 225mm, EH 300mm, Vol. 9.20L
E12-006 Vacuum desiccator, PP/PC, 200mm AUD127.00 stock?
E12-007 Vacuum desiccator, PP/PC, 250mm AUD156.00 stock?
Clear polycarbonate top. White polypropylene base provides excellent chemical resistance. Supplied with O-ring, PP perforated plate and stopcock with PTFE plug. Will hold a vacuum of 740mm Hg for 24 hours.
Dimensions:
E12-006 = ID 200mm, IH 175mm, EH 230mm, Vol. 4.35L
E12-007 = ID 250mm, IH 225mm, EH 300mm, Vol. 9.20L
E12-006 Vacuum desiccator, PP/PC, 200mm AUD127.00 stock?
E12-007 Vacuum desiccator, PP/PC, 250mm AUD156.00 stock?
E12-006
DESICCATORS WITH PORCELAIN PLATES glass
Glass desiccator (without vacuum) for dry storage of small sensitive items. Broad ground glass surface for sealing and glass knob for lifting of cover.
Dimensions:
E110 - H185mm, OD164mm
E115 - H220mm, OD206mm
E110 Desiccator, glass, ID100mm AUD79.00 stock?
E115 Desiccator, glass, ID150mm AUD112.00 stock?
Glass desiccator (without vacuum) for dry storage of small sensitive items. Broad ground glass surface for sealing and glass knob for lifting of cover.
Dimensions:
E110 - H185mm, OD164mm
E115 - H220mm, OD206mm
E110 Desiccator, glass, ID100mm AUD79.00 stock?
E115 Desiccator, glass, ID150mm AUD112.00 stock?
E110
VACUUM DESICCATORS WITH PORCELAIN PLATES glass
Glass vacuum desiccator, these models have a port for connecting tubing to a pump and a simple, ground glass valve mechanism.
Dimensions:
E1218G - H310mm, OD238mm
E1221G - H340mm, OD268mm
E1218G Vacuum desiccator, glass, ID180mm AUD186.00 stock?
E1221G Vacuum desiccator, glass, ID210mm AUD198.00 stock?
E1230G Vacuum desiccator, glass, ID300mm AUD295.00 stock?
Glass vacuum desiccator, these models have a port for connecting tubing to a pump and a simple, ground glass valve mechanism.
Dimensions:
E1218G - H310mm, OD238mm
E1221G - H340mm, OD268mm
E1218G Vacuum desiccator, glass, ID180mm AUD186.00 stock?
E1221G Vacuum desiccator, glass, ID210mm AUD198.00 stock?
E1230G Vacuum desiccator, glass, ID300mm AUD295.00 stock?
[click to enlarge]
E1218G
E1230G
| 
|
