- Conductivity standards for EC meters on page A1
- Electrode cleaning, storage and filling solutions on page A1
- pH Calibration buffers on page A3
- Economy range of Sper Scientific and other small instruments on pages E4 - E7
PST is an agent for Hanna Instruments in Australia and New Zealand, but we can ship these instruments and testkits advantageously world-wide.
We discount Hanna's Australian list prices and add no freight charges to Australian orders (>$200). Freight charges to other destinations are minimal.
We hold some these items in stock; Hanna Australia has most of them available for immediate shipment.
Disregard the shipping time indicated by Stock Availability, the instruments will be shipped within a week.
This page shows a selection of popular Hanna meters. A complete list of instruments is linked to the Hanna USA catalogue. All information on the USA site is current, however, the literature downloads contain information specific to the USA market only.
Please choose your requirements and then ask ProSciTech for a quotation. Please don't double up by asking Hanna Australia too, comparing with the same model makes no sense. Particularly since we supply meters freight free (within Oz) and give a small discount on expensive meters.
Warranty
Instruments: 1 year
Electrodes: 6 months
ATC - Automatic Temperature Compensation
COD - Chemical Oxygen Demand
DO - Dissolved Oxygen
EC - Electrical Conductivity
ISE - Ion-Specific Electrode
mV - milli-Volt
ORP - Oxidation Reduction Potential
TDS - Total Dissolved Solids
FTU/NTU - Formazin/ Nephelometric Turbidity Units
We hold some these items in stock; Hanna Australia has most of them available for immediate shipment.
Disregard the shipping time indicated by Stock Availability, the instruments will be shipped within a week.
This page shows a selection of popular Hanna meters. A complete list of instruments is linked to the Hanna USA catalogue. All information on the USA site is current, however, the literature downloads contain information specific to the USA market only.
Please choose your requirements and then ask ProSciTech for a quotation. Please don't double up by asking Hanna Australia too, comparing with the same model makes no sense. Particularly since we supply meters freight free (within Oz) and give a small discount on expensive meters.
Warranty
Instruments: 1 year
Electrodes: 6 months
ATC - Automatic Temperature Compensation
COD - Chemical Oxygen Demand
DO - Dissolved Oxygen
EC - Electrical Conductivity
ISE - Ion-Specific Electrode
mV - milli-Volt
ORP - Oxidation Reduction Potential
TDS - Total Dissolved Solids
FTU/NTU - Formazin/ Nephelometric Turbidity Units
WATERPROOF pH/ TEMP TESTERS, pHep 4 & pHep 5
The pHep 4, accuracy ±0.1pH, and pHep 5, accuracy ±0.05pH, include features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.
The testers are supplied with protective cap, electrode removal tool, batteries and instructions.
EHI98127 pH/°C tester, waterproof, accuracy ±0.1pH AUD222.00 stock?
EHI98128 pH/°C tester, waterproof, accuracy ±0.05pH AUD229.00 stock?
EHIR73127 Replacement electrode for EHI98127, EHI98128 AUD124.00 stock?
The pHep 4, accuracy ±0.1pH, and pHep 5, accuracy ±0.05pH, include features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.
The testers are supplied with protective cap, electrode removal tool, batteries and instructions.
EHI98127 pH/°C tester, waterproof, accuracy ±0.1pH AUD222.00 stock?
EHI98128 pH/°C tester, waterproof, accuracy ±0.05pH AUD229.00 stock?
EHIR73127 Replacement electrode for EHI98127, EHI98128 AUD124.00 stock?
EHI98127
COMBINATION pH/ EC/ TDS/ °C TESTERS
These combination waterproof testers offer high accuracy pH, EC/ TDS and temperature measurements in a single instrument. No more switching between meters for your routine measurements. The waterproof testers (they even float) have a large, easy-to-read, dual-level LCD and automatic shut-off. pH and EC/ TDS readings are automatically compensated for the effects of temperature (ATC).
These technologically advanced testers have a replaceable pH electrode cartridge with an extendable cloth junction, as well as an EC/ TDS graphite electrode that resists contamination by salts and other substances, giving these meters a greatly extended life.
The EC/TDS conversion factor is user selectable as is the temperature compensation coefficient (ß).
The testers are supplied with protective cap, electrode removal tool, batteries and instructions.
EHIE1285-6 is a multi-pin pH electrode for HI 9813-6, with cloth junction, 7-pole, 2m cable, for greenhouses, hydroponics, environmental monitoring, water treatment, boilers and cooling towers. HI 9813-6 is a waterproof pH/EC/TDS/°C meter with pH electrode diagnostics.
Specifications and manual for EHI98129
Specifications and manual for EHI98130
Specifications for EHIE1285-6
EHI98129 pH/EC/TDS/°C tester, low range EC AUD327.00 stock?
EHI98130 pH/EC/TDS/°C tester, high range EC AUD327.00 stock?
EHIE1285-6 Multi-pin pH electrode for HI 9813-6 AUD243.00 stock?
These combination waterproof testers offer high accuracy pH, EC/ TDS and temperature measurements in a single instrument. No more switching between meters for your routine measurements. The waterproof testers (they even float) have a large, easy-to-read, dual-level LCD and automatic shut-off. pH and EC/ TDS readings are automatically compensated for the effects of temperature (ATC).
These technologically advanced testers have a replaceable pH electrode cartridge with an extendable cloth junction, as well as an EC/ TDS graphite electrode that resists contamination by salts and other substances, giving these meters a greatly extended life.
The EC/TDS conversion factor is user selectable as is the temperature compensation coefficient (ß).
The testers are supplied with protective cap, electrode removal tool, batteries and instructions.
EHIE1285-6 is a multi-pin pH electrode for HI 9813-6, with cloth junction, 7-pole, 2m cable, for greenhouses, hydroponics, environmental monitoring, water treatment, boilers and cooling towers. HI 9813-6 is a waterproof pH/EC/TDS/°C meter with pH electrode diagnostics.
Specifications and manual for EHI98129
Specifications and manual for EHI98130
Specifications for EHIE1285-6
EHI98129 pH/EC/TDS/°C tester, low range EC AUD327.00 stock?
EHI98130 pH/EC/TDS/°C tester, high range EC AUD327.00 stock?
EHIE1285-6 Multi-pin pH electrode for HI 9813-6 AUD243.00 stock?
EHI98129
PORTABLE pH/ mV/ °C METER
EHI 314 is a rugged portable pH meter designed to be easy-to-use, yet reliable and practical. It is ideal for education and measurements in the field.
Simple pH calibration is performed manually through 2 trimmers. Measurements are automatically compensated for variations in temperature.
EHI8314 shows the reading together with the current mode (pH, mV or °C). A low battery indicator will alert the user when the battery needs to be replaced.
EHI8314 is supplied with HI 1217D pH electrode, calibration and cleaning solutions, calibration screwdriver, battery, protective case and instructions.
Two models are available:
EHI8314 uses pH electrodes with DIN connector and internal temperature sensor.
EHI83141 is provided with separate connectors for pH electrode (BNC) and temperature probe.
Specifications and manual for EHI8314
EHI8314 pH/mV/ºC meter, portable AUD550.00 stock?
EHI 314 is a rugged portable pH meter designed to be easy-to-use, yet reliable and practical. It is ideal for education and measurements in the field.
Simple pH calibration is performed manually through 2 trimmers. Measurements are automatically compensated for variations in temperature.
EHI8314 shows the reading together with the current mode (pH, mV or °C). A low battery indicator will alert the user when the battery needs to be replaced.
EHI8314 is supplied with HI 1217D pH electrode, calibration and cleaning solutions, calibration screwdriver, battery, protective case and instructions.
Two models are available:
EHI8314 uses pH electrodes with DIN connector and internal temperature sensor.
EHI83141 is provided with separate connectors for pH electrode (BNC) and temperature probe.
Specifications and manual for EHI8314
EHI8314 pH/mV/ºC meter, portable AUD550.00 stock?
EHI8314
pH/ mV/ °C BENCH METER FOR QUALITY CONTROL
EPH211 is an advanced microprocessor based pH/mV bench meter that is easy to operate and precise, making it perfect for quality control laboratory applications, as well as a wide range of other measurement applications.
This meter performs pH, mV and temperature measurements; the large display shows pH (or mV) and temperature values simultaneously. It come equipped with 5 memorised buffers for pH calibration (pH 4.01, 6.86, 7.01, 9.18 and 10.01), and the automatic recognition system eliminates calibration error. The user is guided through the calibration process with simple instructions on the display.
Temperature compensation is automatic through the probe supplied with the instrument; if necessary the user can also set temperature compensation manually.
EPH211 is supplied with HI 1131B pH electrode, HI 7669/2W temperature probe, pH 4 and pH 7 buffer sachets (20 mL each), electrode refilling solution, electrode holder, 12 Vdc power adapter and instructions.
Specifications and manual for EPH211
EPH211 pH/mV/°C bench meter for quality control AUD984.00 stock?
EPH211 is an advanced microprocessor based pH/mV bench meter that is easy to operate and precise, making it perfect for quality control laboratory applications, as well as a wide range of other measurement applications.
This meter performs pH, mV and temperature measurements; the large display shows pH (or mV) and temperature values simultaneously. It come equipped with 5 memorised buffers for pH calibration (pH 4.01, 6.86, 7.01, 9.18 and 10.01), and the automatic recognition system eliminates calibration error. The user is guided through the calibration process with simple instructions on the display.
Temperature compensation is automatic through the probe supplied with the instrument; if necessary the user can also set temperature compensation manually.
EPH211 is supplied with HI 1131B pH electrode, HI 7669/2W temperature probe, pH 4 and pH 7 buffer sachets (20 mL each), electrode refilling solution, electrode holder, 12 Vdc power adapter and instructions.
Specifications and manual for EPH211
EPH211 pH/mV/°C bench meter for quality control AUD984.00 stock?
EPH211
pH METER WITH CALIBRATION CHECK
A pH electrode that is properly manufactured and kept clean will retain its measuring integrity for quite a long time. The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note because, during calibration, the instrument assumes that the electrode is clean and that the standardisation curve created during the calibration process will remain a valid reference until the next calibration.
pH meters on the market today will allow an offset of approximately ±60 mV. The deviation from 0 mV is not unusual, in fact it represents the true characteristics of the pH electrode. The deviation from 0 mV becomes a problem if it is the result of calibrating a dirty electrode.
EHI221 and EHI223 compare the characteristics of the pH electrode from one calibration to the next. In case of large variances in the electrode condition that can only be the result of a soiled sensor, these meters alert the user that the electrode needs to be properly cleaned prior to calibration and measuring.
EHI221 is supplied with HI 1131P refillable pH electrode (glass-body, BNC & Pin with 1m cable), HI 7669/2W stainless steel temperature probe, HI 76404 electrode holder, pH 4 and pH 7 buffer sachets, electrode refilling solution, 12 Vdc power adapter and instructions.
Specifications and manual for EHI221
EHI223 has higher accuracy and datalogging for 500 samples (EHI221 logs 100 samples).
EHI221 pH meter with calibration check AUD1,029.00 stock?
A pH electrode that is properly manufactured and kept clean will retain its measuring integrity for quite a long time. The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note because, during calibration, the instrument assumes that the electrode is clean and that the standardisation curve created during the calibration process will remain a valid reference until the next calibration.
pH meters on the market today will allow an offset of approximately ±60 mV. The deviation from 0 mV is not unusual, in fact it represents the true characteristics of the pH electrode. The deviation from 0 mV becomes a problem if it is the result of calibrating a dirty electrode.
EHI221 and EHI223 compare the characteristics of the pH electrode from one calibration to the next. In case of large variances in the electrode condition that can only be the result of a soiled sensor, these meters alert the user that the electrode needs to be properly cleaned prior to calibration and measuring.
EHI221 is supplied with HI 1131P refillable pH electrode (glass-body, BNC & Pin with 1m cable), HI 7669/2W stainless steel temperature probe, HI 76404 electrode holder, pH 4 and pH 7 buffer sachets, electrode refilling solution, 12 Vdc power adapter and instructions.
Specifications and manual for EHI221
EHI223 has higher accuracy and datalogging for 500 samples (EHI221 logs 100 samples).
EHI221 pH meter with calibration check AUD1,029.00 stock?
EHI221
CONDUCTIVITY/ TOTAL DISSOLVED SOLIDS TESTERS
The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognises the calibration solution and calibrates itself. Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity.
The Primo 1, 3 and 4 testers have been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, is attached to a 1 meter cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading.
The testers are supplied with batteries and instructions.
Specifications and manual for Primo 2
Specifications and manual for Primo 3
Primo: EC/TDS tester, range 1 - 1999ppm
Primo 1: EC/TDS tester, range 1 - 1999ppm, with 1m cable
Primo 2: EC/TDS/°C tester, range 1 - 1999ppm, 1 - 60°C
Primo 3: EC/TDS/°C tester, range 1 - 1999ppm, 1 - 60°C, with 1m cable
Primo 4: EC/TDS tester, range 1 - 10mS/cm, with 1m cable
Primo 5: EC/TDS tester, range 1 - 1999µS/cm
EPRIMO2 EC/TDS/°C tester, ppm/°C AUD146.00 stock?
EPRIMO3 EC/TDS/°C tester with 1m probe cable, ppm/°C AUD165.00 stock?
The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognises the calibration solution and calibrates itself. Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity.
The Primo 1, 3 and 4 testers have been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, is attached to a 1 meter cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading.
The testers are supplied with batteries and instructions.
Specifications and manual for Primo 2
Specifications and manual for Primo 3
Primo: EC/TDS tester, range 1 - 1999ppm
Primo 1: EC/TDS tester, range 1 - 1999ppm, with 1m cable
Primo 2: EC/TDS/°C tester, range 1 - 1999ppm, 1 - 60°C
Primo 3: EC/TDS/°C tester, range 1 - 1999ppm, 1 - 60°C, with 1m cable
Primo 4: EC/TDS tester, range 1 - 10mS/cm, with 1m cable
Primo 5: EC/TDS tester, range 1 - 1999µS/cm
EPRIMO2 EC/TDS/°C tester, ppm/°C AUD146.00 stock?
EPRIMO3 EC/TDS/°C tester with 1m probe cable, ppm/°C AUD165.00 stock?
Primo 2
Primo 4
WATERPROOF, MULTI-RANGE CONDUCTIVITY METER WITH TEMPERATURE SENSOR
EHI8633 and EHI8733 have been designed specifically for use in areas of production and quality control. It is often necessary to test samples with different concentrations ranging from deionised water to brine.
The amperometric system would require constant recalibration and probe changes, thus making the measurement process very time consuming and unreliable. To solve this problem, HANNA® has developed the EHI8633, which uses a 4-ring potentiometric probe. The rugged probe is made of PVC - ideal for indoor, as well as outdoor measurements.
By using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199900 µS/cm.
If temperature of the solution fluctuates, EHI8733, with a built-in temperature sensor and Automatic Temperature Compensation, is the perfect instrument.
EHI8733 is supplied with HI 76302W probe with internal temperature sensor & 1m cable, calibration screwdriver, calibration solutions, protective case, battery and instructions.
As an accessory, HI 721313 is available. This kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardising solution at 12880 µS/cm.
Specifications and manual for EHI8733
EHI8633 comes without the temperature sensor.
EHI8733 Conductivity meter with temperature sensor, multi-range AUD943.00 stock?
EHI8633 and EHI8733 have been designed specifically for use in areas of production and quality control. It is often necessary to test samples with different concentrations ranging from deionised water to brine.
The amperometric system would require constant recalibration and probe changes, thus making the measurement process very time consuming and unreliable. To solve this problem, HANNA® has developed the EHI8633, which uses a 4-ring potentiometric probe. The rugged probe is made of PVC - ideal for indoor, as well as outdoor measurements.
By using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199900 µS/cm.
If temperature of the solution fluctuates, EHI8733, with a built-in temperature sensor and Automatic Temperature Compensation, is the perfect instrument.
EHI8733 is supplied with HI 76302W probe with internal temperature sensor & 1m cable, calibration screwdriver, calibration solutions, protective case, battery and instructions.
As an accessory, HI 721313 is available. This kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardising solution at 12880 µS/cm.
Specifications and manual for EHI8733
EHI8633 comes without the temperature sensor.
EHI8733 Conductivity meter with temperature sensor, multi-range AUD943.00 stock?
EHI8733 with built-in temperature sensor
BENCH CONDUCTIVITY METER WITH ATC, MULTI-RANGE
The EEC215 is a multi-range bench top conductivity meter with four measurement ranges to ensure the highest resolution and accuracy to meet your measuring requirements.
Calibration is performed manually up to 1-point simply by adjusting a knob on the front of the meter. With a user selectable temperature coefficient and a temperature sensor incorporated in the probe, temperature compensation of the reading is automatic.
Included with this meter is the fast responding HI 76303 probe. This probe is equipped with a 4-ring platinum sensor, built-in internal temperature sensor and a 1m cable, which can be used for measuring highly acidic or alkaline samples, or at high temperatures.
EC215 is supplied with 12 Vdc adapter and instructions.
Specifications and manual for EEC215
EEC215 Bench conductivity meter with ATC, multi-range AUD1,720.00 stock?
The EEC215 is a multi-range bench top conductivity meter with four measurement ranges to ensure the highest resolution and accuracy to meet your measuring requirements.
Calibration is performed manually up to 1-point simply by adjusting a knob on the front of the meter. With a user selectable temperature coefficient and a temperature sensor incorporated in the probe, temperature compensation of the reading is automatic.
Included with this meter is the fast responding HI 76303 probe. This probe is equipped with a 4-ring platinum sensor, built-in internal temperature sensor and a 1m cable, which can be used for measuring highly acidic or alkaline samples, or at high temperatures.
EC215 is supplied with 12 Vdc adapter and instructions.
Specifications and manual for EEC215
EEC215 Bench conductivity meter with ATC, multi-range AUD1,720.00 stock?
EEC215
TOTAL DISSOLVED SOLIDS METER, WATERPROOF, WIDE RANGE
EHI8734 has been specifically designed for the water conditioning industry, particularly in the softening, demineralisation, reverse osmosis and drinking water applications.
Three ranges of measurement assure the highest accuracy possible. All three ranges can be executed at the touch of a button without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about recalibration.
To add to the meter's accuracy and efficiency, Manual Temperature Compensation is possible through a knob on the front panel.
The 4-ring potentiometric probe, HI 76301D, is made of rugged PVC for the best protection in the field and is supplied with a 1m cable to access hard to reach areas.
The ratio between conductivity and TDS is factory calibrated at 0.5 (CaCO3 value).
EHI8734 is comes with with calibration screwdriver, calibration solutions, protective case, battery and instructions.
Specifications and manual for EHI8734
EHI8734 TDS meter, portable, waterproof, wide range AUD919.00 stock?
EHI8734 has been specifically designed for the water conditioning industry, particularly in the softening, demineralisation, reverse osmosis and drinking water applications.
Three ranges of measurement assure the highest accuracy possible. All three ranges can be executed at the touch of a button without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about recalibration.
To add to the meter's accuracy and efficiency, Manual Temperature Compensation is possible through a knob on the front panel.
The 4-ring potentiometric probe, HI 76301D, is made of rugged PVC for the best protection in the field and is supplied with a 1m cable to access hard to reach areas.
The ratio between conductivity and TDS is factory calibrated at 0.5 (CaCO3 value).
EHI8734 is comes with with calibration screwdriver, calibration solutions, protective case, battery and instructions.
Specifications and manual for EHI8734
EHI8734 TDS meter, portable, waterproof, wide range AUD919.00 stock?
EHI8734
COMBINATION METERS
Multi-parameter instruments
Including:
HI 98280 GPS Multiparameter meter with Fast Tracker™ tag identification system
HI 93414 EPA compliant portable turbidity and chlorine meter with Fast Tracker™
HI 9813-6 Waterproof pH/EC/TDS/temperature meter with pH electrode diagnostic
HI 9813-5 Waterproof pH/EC/TDS/temperature meter for growers
HI 9813-0 Waterproof pH/EC/TDS meter for growers
HI 9812-5 Versatile instruments for water conditioning
HI 9811-5 pH, conductivity to 6000 µS/cm and temperature meter, water resistant
HI 98204 pH/ORP/EC/temperature in one unit
Features
Multi-parameter instruments
Including:
HI 98280 GPS Multiparameter meter with Fast Tracker™ tag identification system
HI 93414 EPA compliant portable turbidity and chlorine meter with Fast Tracker™
HI 9813-6 Waterproof pH/EC/TDS/temperature meter with pH electrode diagnostic
HI 9813-5 Waterproof pH/EC/TDS/temperature meter for growers
HI 9813-0 Waterproof pH/EC/TDS meter for growers
HI 9812-5 Versatile instruments for water conditioning
HI 9811-5 pH, conductivity to 6000 µS/cm and temperature meter, water resistant
HI 98204 pH/ORP/EC/temperature in one unit
Features
- Substitutes two or three meters
- Better accuracy, great repeatability & long battery life
- Ergonomic design
MULTI-PARAMETER WATER QUALITY METER
The EHI9828 multi-parameter portable meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure and temperature. Some of the most advanced capabilities available are incorporated into this meter. Designed for intuitive operation, the menu-driven navigation is user-friendly and logical. A backlit 128 x 64 pixels graphic LCD, that automatically sizes the digits, allows full configuration of each measured parameter, displays on-screen graphing and has options for units and language selections, provides high-quality resolution and sophistication unsurpassed in its class.
Engineered with smart features such as auto-recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings and measurement check - to eliminate erroneous readings - this design actually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering its capabilities. Each parameter is fully supported by the on-screen contextual HELP function, which is active during measurement and calibration modes. For field applications, Hanna's Quick Calibration allows the user to standardise pH, conductivity and dissolved oxygen, all with one solution. While in calibration mode, the meter will also assess and verify probe functionality. For monitoring and recording data, EHI9828 can be equipped with the optional T.I.S. - Tag Identification System: i-Buttons© with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The LOGGER function memorises data from each connected sensor and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
EHI9828 is designed for demanding outdoor environments. The meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1m of water), and the multi-sensor probe, HI 769828, with an IP68 rating, can be left underwater for an extended period of time. This intelligent probe contains a built-in microprocessor with amplifiers, interprets the high impedance signals from each sensor and sends the converted data to the meter. Consequently, common tolerance issues associated with high impedance signals, such as limiting cable length, and noise interferences are eliminated. The probe maintains reliable communication with the meter, and the user is warned of any problems, such as a broken cable line.
Five out of six measured parameters are housed in the probe: pH/pH mV, ORP, EC, % saturation and mg/L (ppm) oxygen and temperature. Each sensor is independently replaceable, and easy to maintain and clean. The sensors are protected by a rugged outer PVC/stainless steel sleeve, the design of which is suited for use in 50mm wells. The intact probe housing is rated to IP68. Standard cable lengths are 4, 10 and 20 meters and custom lengths are available upon request. The galvanic DO sensor has a built-in thermistor to provide fast temperature corrected readings. Of course, there is no polarisation time for this sensor, so it is ready for measurement at a moment's notice. For EC, a 4-ring conductivity system ensures stable readings that are immune to polarisation and the buffering effect of surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor. The meter automatically recognises the presence of either the pH or pH/ORP sensor. Both sensors have a cloth junction which allows greater sensitivity, and are gel-filled for improved resistance to contamination. The meter also displays pH/mV readings, ideal for trouble-shooting. It accepts both alkaline and rechargeable batteries and can be recharged in the field via the 12V car accessory outlet adapter, included.
EHI9828 is supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperaure), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.
Specifications and manual for EHI9828
EHI9828-4 Multi-parameter water quality meter with 4m probe cable ask stock?
The EHI9828 multi-parameter portable meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure and temperature. Some of the most advanced capabilities available are incorporated into this meter. Designed for intuitive operation, the menu-driven navigation is user-friendly and logical. A backlit 128 x 64 pixels graphic LCD, that automatically sizes the digits, allows full configuration of each measured parameter, displays on-screen graphing and has options for units and language selections, provides high-quality resolution and sophistication unsurpassed in its class.
Engineered with smart features such as auto-recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings and measurement check - to eliminate erroneous readings - this design actually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering its capabilities. Each parameter is fully supported by the on-screen contextual HELP function, which is active during measurement and calibration modes. For field applications, Hanna's Quick Calibration allows the user to standardise pH, conductivity and dissolved oxygen, all with one solution. While in calibration mode, the meter will also assess and verify probe functionality. For monitoring and recording data, EHI9828 can be equipped with the optional T.I.S. - Tag Identification System: i-Buttons© with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The LOGGER function memorises data from each connected sensor and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
EHI9828 is designed for demanding outdoor environments. The meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1m of water), and the multi-sensor probe, HI 769828, with an IP68 rating, can be left underwater for an extended period of time. This intelligent probe contains a built-in microprocessor with amplifiers, interprets the high impedance signals from each sensor and sends the converted data to the meter. Consequently, common tolerance issues associated with high impedance signals, such as limiting cable length, and noise interferences are eliminated. The probe maintains reliable communication with the meter, and the user is warned of any problems, such as a broken cable line.
Five out of six measured parameters are housed in the probe: pH/pH mV, ORP, EC, % saturation and mg/L (ppm) oxygen and temperature. Each sensor is independently replaceable, and easy to maintain and clean. The sensors are protected by a rugged outer PVC/stainless steel sleeve, the design of which is suited for use in 50mm wells. The intact probe housing is rated to IP68. Standard cable lengths are 4, 10 and 20 meters and custom lengths are available upon request. The galvanic DO sensor has a built-in thermistor to provide fast temperature corrected readings. Of course, there is no polarisation time for this sensor, so it is ready for measurement at a moment's notice. For EC, a 4-ring conductivity system ensures stable readings that are immune to polarisation and the buffering effect of surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor. The meter automatically recognises the presence of either the pH or pH/ORP sensor. Both sensors have a cloth junction which allows greater sensitivity, and are gel-filled for improved resistance to contamination. The meter also displays pH/mV readings, ideal for trouble-shooting. It accepts both alkaline and rechargeable batteries and can be recharged in the field via the 12V car accessory outlet adapter, included.
EHI9828 is supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperaure), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.
Specifications and manual for EHI9828
EHI9828-4 Multi-parameter water quality meter with 4m probe cable ask stock?
EHI9828
pH/ EC/ °C ELECTRODE
Spare multi-pin pH/EC electrode with temperature sensor, cloth junction, gel-filled, 7-pole; 2 m cable, for greenhouses, hydroponics, environmental monitoring, water treatment, boilers and cooling towers.
Suitable for the following Hanna meters:
HI 9811-5 - pH, conductivity to 6000 µS/cm and temperature with a water-resistant meter
HI 9812-5 - versatile instruments for water conditioning
HI 9813-5 - waterproof pH/EC/TDS/temperature meter for growers
Specifications and for EHIE1285-5
EHIE1285-5 Multi-pin pH/ EC/ °C electrode for EHI9811-5, EHI9812-5, EHI9813-5 AUD256.00 stock?
Spare multi-pin pH/EC electrode with temperature sensor, cloth junction, gel-filled, 7-pole; 2 m cable, for greenhouses, hydroponics, environmental monitoring, water treatment, boilers and cooling towers.
Suitable for the following Hanna meters:
HI 9811-5 - pH, conductivity to 6000 µS/cm and temperature with a water-resistant meter
HI 9812-5 - versatile instruments for water conditioning
HI 9813-5 - waterproof pH/EC/TDS/temperature meter for growers
Specifications and for EHIE1285-5
EHIE1285-5 Multi-pin pH/ EC/ °C electrode for EHI9811-5, EHI9812-5, EHI9813-5 AUD256.00 stock?
EHIE1285-5
| 
|
