KI F.W. 166.00. CAS#7681-11-0
See Bismuth carbonate for references on use. MSDS
C360 Potassium iodide AUD63.00 /50g Available
KMnO4 F.W. 158.03 CAS#7722-64-7 MSDS
We can only supply this item to bona fide laboratories.
C364 Potassium permanganate, analytical grade AUD66.00 /500g Availability
KMnO4 CAS#7722-64-7 MSDS - It is a salt consisting of K+ and MnO4− ions.
Also known as permanganate of potash, Condy's crystals, Chameleon mineral, or Potassium manganate(VII).
It dissolves in water giving an intense purple solution.
Potassium permanganate decomposes when exposed to light: 2 KMnO4(s) → K2MnO4(s) + MnO2(s)+O2(g)
C365-100 Potassium permanganate, technical grade AUD10.00 /100g Stock?
C365-500 Potassium permanganate, technical grade AUD45.00 /500g Available
This produces the same results in preservation, handling and sectioning as the discontinued Epon 812.
May be substituted for Epon 812 in all Epon 812 formulations.
SDS | User Notes
C045 Procure 812 AUD88.00 /450mL Available
Our replacement for the discontinued Epon 812. It produces the same results in preservation, handling and sectioning and may be substituted for Epon in all standard Epon 812 formulations. Dr. John Luft: Improvements in Epoxy Resin Embedding Methods J.Biophys. Bio-Chem. Cytol., Vol.9, 409 (1961) Glauert has recommended that twice the quantity of BDMA in lieu of DMP-30 be used.
Consists of:
- 450ml Procure 812 (C045)
- 500ml DDSA (C044)
- 450ml NMA (C046)
- 100g BDMA (C054)
C038 Procure 812 embedding kit AUD271.00
Procure is substituted for Epon 812 in Mollenhauer's formula. Stain Tech., 39, 11 (1964) Hardness may be varied. Excellent cutting properties, preservation and staining. Glauert has recommended that twice the quantity of BDMA in lieu of DMP-30 be used.
Consists of:
- 450ml Procure 812 (C045)
- 500ml Araldite 502 (C041)
- 500ml DDSA (C044)
- 100g BDMA (C054)
Kits are assembled as needed.
C039 Procure-Araldite embedding kit AUD189.00
1,2-Epoxypropane, Methyloxirane E.M. Grade. F.W. 58.08 CH3CHCH2O M.P. -112oC. B.P. 34oC. F.P. -37oC.
Vapour pressure @ 33oC 980 mbar. Ignition temperature 430oC Solvent agent for epoxy resins. Used widely for infiltration and gradual replacement of dehydration agent.
Fumehood and gloves advised; carcinogen. MSDS
User Notes
C156 Propylene oxide AUD134.00 /250mL 10% discount for 4 Available
(Ethylene glycol diglycidyl ether) C8H14O4 F.W. 174.20 CAS #2224-15-9
Specific Gravity (H2O=1) : 1.15, store refrigerated 0-5ºC. Note: limited shelf life of about eight months when refrigerated. Embedding resin, component of Quetol kit. Because of the limited shelf life we obtain this item on indent - allow two weeks.
MSDS
C058 Quetol 651 resin AUD133.00 /225mL Availability
A water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks.
Kushida, H. et al., (1986) Pro. 11th Int. Cong. Electron Microsc., p. 2177. Kyoto.
Store the Quetol refrigerated, even then the shelf life is only about eight months. Because of the limited shelf life we obtain this item on indent - allow two weeks.
Components:
- 225mL Quetol 651 (C058)
- 450mL NMA (C046)
- 450mL NSA (C059)
- 50mL DMP-30 (C053)
C034 Quetol 651/NSA embedding kit AUD291.00 /kit
Also called Basic Violet 10. C28H31CIN2O3 Dye content ~80%; soluble in water and ethanol.
Conn's Biological Stains, 9th ed,; Lillie, RD, Ed; Williams & Wilkins, Baltimore 1977, P332
C114 Rhodamine B, C.I. 45170 AUD33.00 /100g Stock?
C1145 Rhodamine B, C.I. 45170 AUD87.00 /500g Available
Acid Red 94.4,5,6,7-Tetrachloro-2',4',5'7'-tetraiodofluorescein sodium salt.
For Conn's technique for staining bacteria and in the Kreyberg method for keratin. Total dye content 80%. MSDS
C137 Rose Bengal, certified, C.I. 45440 AUD16.00 /5g Stock?
C1375 Rose Bengal, certified, C.I. 45440 AUD34.00 /25g Available
[(NH3)5RuORu(NH3)4ORu(NH3)5]Cl6·4H2O F.W.858.42 CAS #11103-72-3
MSDS
C075 Ruthenium Red AUD98.00 /1g Available
Basic Red.
For use as a chromosome stain in the Flemming triple stain, in combination with Light Green SF Yellowish or Fast Green FCF, and in Gram stains.
Minimum dye content 80%.
MSDS
C138 Safranin O, certified, C.I. 50240 AUD30.00 /25g Stock?
C1381 Safranin O, certified, C.I. 50240 AUD67.00 /100g Stock?
C1385 Safranin O, certified, C.I. 50240 AUD241.00 /500g Available
Drying agent with the capacity to absorb 27% of its weight in water within one day at 80% relative humidity. Bulk density is about 0.7 (70g/100ml). 2 to 4mm pellet size range, which equates ASTM mesh 8 to 10. Dry pellets are orange and turn dark green when near saturation. Heat applied to an open container holding silica gel - a hotplate or an oven at 110°C, will restore silica gel to its previous moisture absorbing capability. Unlimited cycles are possible.
Silica gel is produced by the reaction of sulphuric acid with sodium silicate.
Orange silica gel does not contain cobalt, which is the indicator in blue silica gel. Silica gel has very low toxicity and ingesting or inhaling small amounts of silica gel dust is not harmful.
Silica gel does not dry completely below about 105°C. The orange indicating dye may be damaged at temperatures above 125°C. Higher temperatures also cause progressive collapse of the fine adsorbent structures. ProSciTech recommends refurbishing of silica gel between 105 and 120°C for at least 2 hours, depending on depth of pellets.
MSDS
Silica gel FAQs - Also contains a colour chart showing colour changes of orange silica gel with increasing hydration
Our price for the 25kg drum includes freight to any Australian destination, but GST is always additional.
C81-005 Silica gel, 2 - 4mm pellets, orange AUD12.00 /500g Stock?
C81-020 Silica gel, 2 - 4mm pellets, orange AUD32.00 /2kg Stock?
C81-250 Silica gel, 2 - 4mm pellets, orange AUD333.00 /25kg Available
AgNO3 F.W.169.89 Assay 99.99%+.
Exceeds ACS and Analar specifications. We supply many histopathology laboratories with this chemical.
Swift, J.A., The electron histochemistry of cystine containing proteins in thin transverse section of human hair. J. R. Microsc.Soc., 88,449 (1968). Thiery, J.P., Mise en evidence des Polysaccharides sur coupes fines en microscopie electronique. J.Microsc. (Paris) 6, 987 (1967)
Rambourg, A., An improved silver methenamine technique for the detection of periodic acid-reactive complex carbohydrates with the electron microscope. J. Histochem. Cytochem. 15,409 (1967). Hermandez et al., Periodic acid-chromic acid methenamine silver technique for glycoprotein detection in the electron microscope., J.Histochem.Cytochem. 16,507 (1968). Braak, H., and Braak, E., A simple procedure for electron microscopy of Golgi-impregnated nerve cells. Neurosci. Lett. 32,1 (1982) MSDS
C139 Silver nitrate, ACS/ISO grade AUD70.00 /25g Stock?
C1391 Silver nitrate, ACS/ISO grade AUD232.00 /100g Stock?
C1395 Silver nitrate, ACS/ISO grade ask Available
Use this to make silver loaded epoxy and more. Very fine, high purity silver powder. May be used to produce electrically highly conducting paints and especially epoxy resins. Usually, the mixture is one half by volume, of powder and a quarter each of epoxy components A + B. These materials mix very easily, but conductivity does not gradually change; rather if a little less silver is used, suddenly conductivity may be completely lost.
Unlike prepared silver epoxies, the powder has an unlimited shelf life and the mixture ratio can be varied to suit. Also, fast-curing or super-strong epoxy may be used as required and silver powder is rather more economical than prepared epoxies.
Note that because of the small particle size the powder and any solutions made are a little yellowish and darker than silver. This relates to particle size and refractive index and not purity.
Product data:
- Average particle diameter 1.4-3.6(µm) (ASTM B330-82)
- Apparent (tap) density 1.6-2.6 g/cm3 (ASTM B527-81)
- Spec. surface area 0.2-0.6m2/g (Quantachrome Monosorb BET Method)
- Silver contents, minimum 99.9%
- Heavy metals 0.02% (max.); Na + K 0.015% (max.)
Ask for bulk prices for well in excess of 200g please.
Silver liquid
C920 Silver powder AUD47.00 /20g 20% discount for 10 Available
C920-1KG Silver powder ask Available
Highly water soluble red dye, but has poor solubility in ethanol. Also called Direct Red 80 and in the class of Tetrakisazo dyes. C45H26N10O21S6Na6 with FW1373.125
Employed as a substitute for acid fuchsin in van Gieson type procedures. It is also used for the demonstration of amyloid by hydrogen bonding, in techniques similar to those using Congo red. Like that dye it retains the green birefringence, but is a little darker. MSDS
C102 Sirius Red F3B, C.I. 35780 AUD15.00 /25g Stock?
C1021 Sirius Red F3B, C.I. 35780 AUD27.00 /100g Stock?
C1025 Sirius Red F3B, C.I. 35780 AUD83.00 /500g 5% discount for 2 Available
